N-5630-2-H00AA

The Rockwell Automation/Allen-Bradley N-5630-2-H00AA is an N-series brushless servo motor with a standard rating (no brake) and a factory-designated standard flange. The N-5630-2-H00AA is adversely affected by Electromagnetic Interference (EMI) which tends to introduce stray signals. The EMI interference can be eliminated by using an AC power filter, proper grounding, and shielding cables carrying signals in or out of the N-5630-2-H00AA motor. Routing signal cables away from the power cables will also minimize EMI interference. The N-5630-2-H00AA operates at a voltage of 230 Volts AC and it has a maximum rated speed of 4000 Revolutions Per Minute (RPM). The peak value of the sinusoidal phase-to-phase voltage for the N-5630-2-H00AA is 47 Vpeak per Krpm at a temperature rating of 25 degrees Celsius. At the same temperature, the motor has a peak value of per phase sine wave amps rating of 0.38 N-m per Apeak.

The N-5630-2-H00AA, like other brushless servo motors, accommodates a maximum operating temperature of 40 degrees Celsius and a minimum operating temperature of 0 degrees Celsius. The Electromagnetic Compatibility (EMC) is enhanced by keeping the cable lengths to only the operating minimums and by routing the encoder, serial, and analog signal cables separately from the power and motor wiring and by grounding the encoder cable shield on both ends. When cabling the N-5630-2-H00AA, a spacing of 1 foot should be left between cables for every 30 feet of parallel run. Additionally, the N-5630-2-H00AA, like other servo motors, should not be powered on when there are disconnected mechanical couplings, pulleys, and cables to prevent injury to equipment and the operators. Motors in the N-5630-2 series have a rated weight of 9.1 kilograms, a winding resistance of 0.89 ohms, and a thermal resistance of 0.81 degrees Celsius per watt.