1203-GK5 - In Stock | Allen Bradley PLC 1203 Communication Modules

×

1203-GK5

Rated 4.8 with 12 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1203-GK5

Description: The Allen-Bradley 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125, 250, and 500 k BPS.
In Stock Ships Today
Request a quote for 1203-GK5

Description:

The Allen-Bradley 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125, 250, and 500 k BPS.


About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1203-GK5.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 12 reviews

    Technical Specifications for 1203-GK5

BrandAllen Bradley / Rockwell Automation
SeriesPanelview 300
Part Number1203-GK5
Input Voltage12 to 25 Volts DC
Input Current110 Milliamps
SCANport Load60 Milliamps
Operating Temp.0 to 50 Degrees (C)
Storage Temp.-40 to 85 Degrees (C)
Relative Humidity0 to 95% (non-condensing)
Baud Rates125. 250, 500 k BPS
Height76 mm (3.0 in.)
Width45 mm (1.8 in.)
Depth123 mm (4.8 in.)
EnclosureNEMA Type 1
DIN Rail Standard35 mm x 7.5 mm (1.38 in. x 0.30 in.)
UPC10662072589684
BrandAllen Bradley / Rockwell Automation
SeriesPanelview 300
Part Number1203-GK5
Input Voltage12 to 25 Volts DC
Input Current110 Milliamps
SCANport Load60 Milliamps
Operating Temp.0 to 50 Degrees (C)
Storage Temp.-40 to 85 Degrees (C)
Relative Humidity0 to 95% (non-condensing)
Baud Rates125. 250, 500 k BPS
Height76 mm (3.0 in.)
Width45 mm (1.8 in.)
Depth123 mm (4.8 in.)
EnclosureNEMA Type 1
DIN Rail Standard35 mm x 7.5 mm (1.38 in. x 0.30 in.)
UPC10662072589684
s

About 1203-GK5

The 1203-GK5 module mounts on a DIN rail system and connects to SCANport products with the use of a SCANport cable. Some features on the module include DIP switches to enable the user to configure the module before connecting it to the DeviceNet network. The module also has a Faulted Node Recovery system, enabling one to change the node address of a device. The user fault response configuration allows the user to customize the adapter actions to communication errors, and LEDs aid in diagnosing network and SCANport health. Required tools and equipment to set up the 1203-GK5 are as follows: DeviceNet communications module (1203-GK5), either a 5-pin or 10-pin plug-in connector, 35 x 7.5 mm DIN rail, 1/8” flathead screwdriver, and appropriate cables for SCANport and DeviceNet connections.



Specifications for the 1203-GK5 module include an input voltage of 12 to 25 V DC, an input current of 110 mA, and a SCANport load of 60 mA. Environmental specifications include an operating temperature to be kept between 0 and 50 Degrees (C), a storage temperature to be kept between -40 and 85 Degrees (C), and a relative humidity to be kept between 0 and 95% (non-condensing). Baud rates for communication specifications are as follows: 125, 250, and 500 k BPS. The mechanical dimensions of the device include a height of 76 mm (3.0 in.), a width of 45 mm (1.8 in.), a depth of 123 mm (4.8 in.), a NEMA Type 1 enclosure, and a DIN Rail Standard of 35 mm x 7.5 mm (1.38 in. x 0.30 in.). 



Repair Services for 1203-GK5

Type Lead Time Price Action
Repair Service 2-4 weeks $419cartAdd to Cart

Our highly skilled technicians can repair your 1203-GK5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1203-GK5

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1203-GK5

Resolutions For 1203-GK5

About

Technical Specifications for 1203-GK5

BrandAllen Bradley / Rockwell Automation
SeriesPanelview 300
Part Number1203-GK5
Input Voltage12 to 25 Volts DC
Input Current110 Milliamps
SCANport Load60 Milliamps
Operating Temp.0 to 50 Degrees (C)
Storage Temp.-40 to 85 Degrees (C)
Relative Humidity0 to 95% (non-condensing)
Baud Rates125. 250, 500 k BPS
Height76 mm (3.0 in.)
Width45 mm (1.8 in.)
Depth123 mm (4.8 in.)
EnclosureNEMA Type 1
DIN Rail Standard35 mm x 7.5 mm (1.38 in. x 0.30 in.)
UPC10662072589684
BrandAllen Bradley / Rockwell Automation
SeriesPanelview 300
Part Number1203-GK5
Input Voltage12 to 25 Volts DC
Input Current110 Milliamps
SCANport Load60 Milliamps
Operating Temp.0 to 50 Degrees (C)
Storage Temp.-40 to 85 Degrees (C)
Relative Humidity0 to 95% (non-condensing)
Baud Rates125. 250, 500 k BPS
Height76 mm (3.0 in.)
Width45 mm (1.8 in.)
Depth123 mm (4.8 in.)
EnclosureNEMA Type 1
DIN Rail Standard35 mm x 7.5 mm (1.38 in. x 0.30 in.)
UPC10662072589684

About 1203-GK5

The 1203-GK5 module mounts on a DIN rail system and connects to SCANport products with the use of a SCANport cable. Some features on the module include DIP switches to enable the user to configure the module before connecting it to the DeviceNet network. The module also has a Faulted Node Recovery system, enabling one to change the node address of a device. The user fault response configuration allows the user to customize the adapter actions to communication errors, and LEDs aid in diagnosing network and SCANport health. Required tools and equipment to set up the 1203-GK5 are as follows: DeviceNet communications module (1203-GK5), either a 5-pin or 10-pin plug-in connector, 35 x 7.5 mm DIN rail, 1/8” flathead screwdriver, and appropriate cables for SCANport and DeviceNet connections.



Specifications for the 1203-GK5 module include an input voltage of 12 to 25 V DC, an input current of 110 mA, and a SCANport load of 60 mA. Environmental specifications include an operating temperature to be kept between 0 and 50 Degrees (C), a storage temperature to be kept between -40 and 85 Degrees (C), and a relative humidity to be kept between 0 and 95% (non-condensing). Baud rates for communication specifications are as follows: 125, 250, and 500 k BPS. The mechanical dimensions of the device include a height of 76 mm (3.0 in.), a width of 45 mm (1.8 in.), a depth of 123 mm (4.8 in.), a NEMA Type 1 enclosure, and a DIN Rail Standard of 35 mm x 7.5 mm (1.38 in. x 0.30 in.). 



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $419cartAdd to Cart

Our highly skilled technicians can repair your 1203-GK5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $419cartAdd to Cart

Our highly skilled technicians can repair your 1203-GK5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF
1203-GK5 PDF