Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1203 Communication Modules 1203-GK5

Product image is representative; revision or series may vary. Contact us to request a specific version.

1203-GK5

|
Need a Specific Revision?

The Allen-Bradley 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125, 250, and 500 k BPS.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1203-GK5

ManufacturerAllen Bradley
CategoryPLCs
Product Line1203 Communication Modules
Part Number1203-GK5
UPC662072589687
Weight0.44 lbs (0.20 kg)
SeriesPanelview 300
Input Voltage12 to 25 Volts DC
Input Current110 Milliamps
SCANport Load60 Milliamps
Operating Temp.0 to 50 Degrees (C)
Storage Temp.-40 to 85 Degrees (C)
Relative Humidity0 to 95% (non-condensing)
Baud Rates125. 250, 500 k BPS
Height76 mm (3.0 in.)
Width45 mm (1.8 in.)
Depth123 mm (4.8 in.)
EnclosureNEMA Type 1
DIN Rail Standard35 mm x 7.5 mm (1.38 in. x 0.30 in.)
Request a Repair

The 1203-GK5 module mounts on a DIN rail system and connects to SCANport products with the use of a SCANport cable. Some features on the module include DIP switches to enable the user to configure the module before connecting it to the DeviceNet network. The module also has a Faulted Node Recovery system, enabling one to change the node address of a device. The user fault response configuration allows the user to customize the adapter actions to communication errors, and LEDs aid in diagnosing network and SCANport health. Required tools and equipment to set up the 1203-GK5 are as follows: DeviceNet communications module (1203-GK5), either a 5-pin or 10-pin plug-in connector, 35 x 7.5 mm DIN rail, 1/8” flathead screwdriver, and appropriate cables for SCANport and DeviceNet connections.

Specifications for the 1203-GK5 module include an input voltage of 12 to 25 V DC, an input current of 110 mA, and a SCANport load of 60 mA. Environmental specifications include an operating temperature to be kept between 0 and 50 Degrees (C), a storage temperature to be kept between -40 and 85 Degrees (C), and a relative humidity to be kept between 0 and 95% (non-condensing). Baud rates for communication specifications are as follows: 125, 250, and 500 k BPS. The mechanical dimensions of the device include a height of 76 mm (3.0 in.), a width of 45 mm (1.8 in.), a depth of 123 mm (4.8 in.), a NEMA Type 1 enclosure, and a DIN Rail Standard of 35 mm x 7.5 mm (1.38 in. x 0.30 in.).