1606-XL4RED20-30
Featuring a special terminal configuration, the 1606-XL4RED20-30 provides a DC-OK signal to indicate proper functionality. This power supply minimizes heat generation during operation, ensuring effici
Call
4.8
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1606 Switched Mode Power Supplies
Allen Bradley's 1606 switched mode power supplies are compact power supplies that are easy to mount on DIN Rails. Some 1606 power supplies support both AC and DC input voltage, and some support multiple AC input voltage ratings. Additionally, the 1606 switched mode power supplies can operate with typical efficiency ratings between 90 and 95%. These power supplies are designed to operate with low levels of electromagnetic emissions and to be immune to a variety of electrical disturbances.
Learn more
Browse 1606 Switched Mode Power Supplies
Browse available units in our catalog of 1606 Switched Mode Power Supplies.
1606-XL60D
This power supply module can operate under high overload currents with a frequency range of 47-63 Hz. The device typically achieves an efficiency of 87.50% while generating a loss of 8.6 W. It include
In Stock Ships Today
5.0
1606-XLS120
Configured to function with DC input voltage between 110V and 300V, this power supply also accommodates AC input from 100V to 240V. It supports a continuous output current of 5A, making it suitable fo
Call
5.0
1606-XLDNET4
Ideal for diverse applications, this limited power source features an output voltage of 24 V DC and a maximum output current of 3.8 A. It operates efficiently at maximum power loss of 13.6 W while man
In Stock Ships Today
5.0
1606-XLB120E
This power supply operates at input frequencies ranging between 50 Hz and 60 Hz. It provides a DC output voltage between 24 and 28 volts and can supply up to 5.0 A. The unit mounts easily on DIN rails
In Stock Ships Tomorrow
4.5
1606-XLSCAP24-12
This uninterruptible power supply module features a capacitor size rated at 12 kilowatts and a charging time of 32 minutes. Its buffer time is 33 seconds at an output of 10 amperes, ensuring continued
Call
5.0
Showing 91-96 of
96
results
About 1606 Switched Mode Power Supplies
The 1606 Switched Mode Power Supplies are manufactured by Allen-Bradley. This range of power supplies are cost-optimized without sacrificing their performance, quality, and reliability. The 1606 Switched Mode Power Supplies support both AC and DC input voltages. For AC voltage, this series of power supplies can meet single and 3-phase application requirements. This wide operating voltage range helps in accommodating a wide range of applications on the industrial floor. Power supplies in the 1606 series are available in different sizes. Additionally, the 1606 Switched Mode Power Supplies have a maximum efficiency rating of 94%, and they have exceptional partial load efficiency. Also, the power supplies in this series have an active power factor correction, a very low inrush current surge, and they can operate at full power at an ambient temperature between a minimum of -25 degrees Celsius and a maximum of 60 degrees Celsius. It is recommended to avoid environments with corrosive atmospheres when installing and mounting these units to prolong their life.
For parallel use, the 1606 Switched Mode Power Supplies all have a current sharing feature. Note that the output power for the 1606 Switched Mode Power Supplies is affected by the surrounding temperature. For example, at 45 degrees Celsius, the 1606 power supplies have an output of 576 Watts, while at 60 degrees Celsius, they have an output power of 480 Watts. The Allen-Bradley 1606 Switched Mode Power Supplies have power losses of 37.8 Watts and 30.6 Watts at 120 Volts AC and 230 Volts AC, respectively. The rated operating temperature for 1606 power supplies ranges from -25 degrees Celsius and 70 degrees Celsius. These power supplies have a weight of 1000 grams. For certifications, the 1606 Switched Mode Power Supplies are listed by the Underwriters Laboratories. For the proper installation of the Allen-Bradley 1606 switched-mode power supplies, the cables need to be made out of copper and they must be rated for operations between 70 and 90 degrees Celsius, and the cable length must be calculated properly too.