1762-OX6I - In Stock | Allen Bradley PLC MicroLogix 1200

1762-OX6I

Rated 4.8 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1762-OX6I

Revisions: Ser A 
Description: The 1762-OX6I output module is a MicroLogix 1200 series output module from Allen-Bradley. It is an isolated MicroLogix 1200 series relay output module. The 1762-OX6I isolated relay output module uses a flat ribbon cable with a female bus connector. This output module can be mounted on a DIN Rail or a panel and it should be mounted with at least 2 inches of space for airflow around it on all sides. The 1762-OX6I isolated relay output module can operate at 32 to 131 degrees Fahrenheit and it can be stored at -40 to 185 degrees Fahrenheit. This content was written and compiled by DO Supply and should not be copied.
In Stock Ships Today
Request a quote for 1762-OX6I

Description: The 1762-OX6I output module is a MicroLogix 1200 series output module from Allen-Bradley. It is an isolated MicroLogix 1200 series relay output module. The 1762-OX6I isolated relay output module uses a flat ribbon cable with a female bus connector. This output module can be mounted on a DIN Rail or a panel and it should be mounted with at least 2 inches of space for airflow around it on all sides. The 1762-OX6I isolated relay output module can operate at 32 to 131 degrees Fahrenheit and it can be stored at -40 to 185 degrees Fahrenheit. This content was written and compiled by DO Supply and should not be copied.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1762-OX6I.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 13 reviews

    Technical Specifications for 1762-OX6I

ManufacturerRockwell Automation
No. of Groups:6 groups; individually isolated
Dimensions, HxWxD:90 x 40.4 x 87 mm (height including mounting tabs is 110 mm) 3.54 x 1.59 x 3.43 in. (height including mounting tabs is 4.33 in.)
Bus current draw, max:110 mA at 5V DC 110 mA at 24V DC
Signal Delay, Off:20 ms
Signal delay, On:10 ms
Power Supply Distance rating:6
Compatible Controllers:MicroLogix 1100, 1200 and 1400
Output Voltage Range:5-125VDC and 120/240VAC
Output Form:Type C Relay
Output Groups:Outputs 0 to 5: Individually isolated
No. of Inputs:Six (6)
Product Type:Discrete Output Module
Product Family:MicroLogix 1200
BrandAllen-Bradley
Part Number/Catalog No.1762-OX6I
Voltage CategoryAC/DC Type
Operating Voltage Range5-264V AC
Outputs(6) Isolated Relay
Mounting Type DIN Rail
ManufacturerRockwell Automation
No. of Groups:6 groups; individually isolated
Dimensions, HxWxD:90 x 40.4 x 87 mm (height including mounting tabs is 110 mm) 3.54 x 1.59 x 3.43 in. (height including mounting tabs is 4.33 in.)
Bus current draw, max:110 mA at 5V DC 110 mA at 24V DC
Signal Delay, Off:20 ms
Signal delay, On:10 ms
Power Supply Distance rating:6
Compatible Controllers:MicroLogix 1100, 1200 and 1400
Output Voltage Range:5-125VDC and 120/240VAC
Output Form:Type C Relay
Output Groups:Outputs 0 to 5: Individually isolated
No. of Inputs:Six (6)
Product Type:Discrete Output Module
Product Family:MicroLogix 1200
BrandAllen-Bradley
Part Number/Catalog No.1762-OX6I
Voltage CategoryAC/DC Type
Operating Voltage Range5-264V AC
Outputs(6) Isolated Relay
Mounting Type DIN Rail
s

About 1762-OX6I

The Allen-Bradley 1762-OX6I is a MicroLogix 1200 I/O expansion module. This module features Six (6) individually isolated Form C contact outputs. With Form C contact outputs, this module is designed with One (1) Normally Open and One (1) Normally Closed terminals therefore, it similarly functions as a switch however, each relay output states may be used to implement automation of different devices.

Each relay output channels are designed to operate at voltage ranges of 5-125VDC and 5-265 VAC. It has a Bus current draw of 110 mA at 5V DC and 110 mA at 24V DC. Each channel exhibits a maximum signal delay 10 ms and typical delay of 6 ms for ON transition. For OFF transition, the maximum signal delay is 20 ms with typical delay of 12 ms. Each output channel has a continuous current per point of 7A.

The 1762-OX6I is compatible for use with MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 controllers. When used with MicroLogix 1100, Four (4) installation instances of 1762-OX6I is supported. Similarly, Six (6) for MicroLogix 1200 and Seven (7) for MicroLogix 1400 controllers.

When installing this module, it requires a 2-inch clearance on all sides of the module. This clearance is similar to installation clearances of other modules. This clearance is specified to provide an adequate working space and promote adequate air-flow to prevent overheating.



The Allen-Bradley 1762-OX6I isolated relay output module operates with an input voltage range of 5 to 265 and 5-125VDC. This module has a bus current draw rang of 110 mA at 5 Volts DC (0.55 kW).

Before installing this module, the environment should be analyzed and studied since the mounting method will depend on the number of shocks or vibrations that the module could receive when operating. There are two ways to mount this module; usually, it can be mounted using a DIN rail with end anchors. The other way to mount this module that is recommended for environments with extreme vibrations is completed by using two Panhead screws per module. After having been mounted, the 1762-OX6I isolated relay output module can be connected to the controller and other I/O equipment using a ribbon cable. The Allen-Bradley 1762-OX6I isolated relay output module has dimensions of 90 x 40 x 87 millimeters (3.54 x 1.58 x 3.43 inches) and it has an approximate shipping weight of 220 grams (0.485 pounds). This module can withstand an operating temperature of 0 to 55 degrees Celsius (-32 to 131 degrees Fahrenheit) and an altitude of 2000 meters (6561 feet).

FAQ for 1762-OX6I

What is the Relay output form of the 1762-OX6I?


The 1762-OX6I has Form C output contacts.

What are the operating voltage range of each of the output channels?


The operating voltage of the output channels are 5-125VDC and 5-265VAC.

What is the installation clearance requirement of the 1762-OX6I?


The 1762-OX6I installation clearance requirement is Six (6) inches on all sides of the module.

Technical Description of 1762-OX6I

OUTPUT MODULE 6POINT ISOLATED HIGH CURRENT

Repair Services for 1762-OX6I

Type Lead Time Price Action
Repair Service 2-4 weeks $355cartAdd to Cart

Our highly skilled technicians can repair your 1762-OX6I. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1762-OX6I

Please refer to the manual for more information about the 1762-OX6I such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1762-OX6I/A, Series A, Rev A Request Quote
Common misspellings:
  • l762-OX6I
  • 1762-0X6I
  • 1762OX6I

Reviews for 1762-OX6I

Internal Review

"The Allen-Bradley 1762-OX6I is a Relay output module with form C contact output that are individually isolated. The main advantage of this output module compared to the 1762-OW8 is that each channel of the 1762-OX6I comes with a pair of Normally Open (N.O.) and Normally Closed (N.C.) contact outputs which may be actively used at the same time, to energize and de-energize different loads. This type of circuitry can perform more tasks, compare to the 1762-OW8 that only has a Normally Open (N.O.) contact. " -DO Supply Tech

Dimensions For 1762-OX6I

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1762-OX6I

Resolutions For 1762-OX6I

About

Technical Specifications for 1762-OX6I

ManufacturerRockwell Automation
No. of Groups:6 groups; individually isolated
Dimensions, HxWxD:90 x 40.4 x 87 mm (height including mounting tabs is 110 mm) 3.54 x 1.59 x 3.43 in. (height including mounting tabs is 4.33 in.)
Bus current draw, max:110 mA at 5V DC 110 mA at 24V DC
Signal Delay, Off:20 ms
Signal delay, On:10 ms
Power Supply Distance rating:6
Compatible Controllers:MicroLogix 1100, 1200 and 1400
Output Voltage Range:5-125VDC and 120/240VAC
Output Form:Type C Relay
Output Groups:Outputs 0 to 5: Individually isolated
No. of Inputs:Six (6)
Product Type:Discrete Output Module
Product Family:MicroLogix 1200
BrandAllen-Bradley
Part Number/Catalog No.1762-OX6I
Voltage CategoryAC/DC Type
Operating Voltage Range5-264V AC
Outputs(6) Isolated Relay
Mounting Type DIN Rail
ManufacturerRockwell Automation
No. of Groups:6 groups; individually isolated
Dimensions, HxWxD:90 x 40.4 x 87 mm (height including mounting tabs is 110 mm) 3.54 x 1.59 x 3.43 in. (height including mounting tabs is 4.33 in.)
Bus current draw, max:110 mA at 5V DC 110 mA at 24V DC
Signal Delay, Off:20 ms
Signal delay, On:10 ms
Power Supply Distance rating:6
Compatible Controllers:MicroLogix 1100, 1200 and 1400
Output Voltage Range:5-125VDC and 120/240VAC
Output Form:Type C Relay
Output Groups:Outputs 0 to 5: Individually isolated
No. of Inputs:Six (6)
Product Type:Discrete Output Module
Product Family:MicroLogix 1200
BrandAllen-Bradley
Part Number/Catalog No.1762-OX6I
Voltage CategoryAC/DC Type
Operating Voltage Range5-264V AC
Outputs(6) Isolated Relay
Mounting Type DIN Rail

About 1762-OX6I

The Allen-Bradley 1762-OX6I is a MicroLogix 1200 I/O expansion module. This module features Six (6) individually isolated Form C contact outputs. With Form C contact outputs, this module is designed with One (1) Normally Open and One (1) Normally Closed terminals therefore, it similarly functions as a switch however, each relay output states may be used to implement automation of different devices.

Each relay output channels are designed to operate at voltage ranges of 5-125VDC and 5-265 VAC. It has a Bus current draw of 110 mA at 5V DC and 110 mA at 24V DC. Each channel exhibits a maximum signal delay 10 ms and typical delay of 6 ms for ON transition. For OFF transition, the maximum signal delay is 20 ms with typical delay of 12 ms. Each output channel has a continuous current per point of 7A.

The 1762-OX6I is compatible for use with MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 controllers. When used with MicroLogix 1100, Four (4) installation instances of 1762-OX6I is supported. Similarly, Six (6) for MicroLogix 1200 and Seven (7) for MicroLogix 1400 controllers.

When installing this module, it requires a 2-inch clearance on all sides of the module. This clearance is similar to installation clearances of other modules. This clearance is specified to provide an adequate working space and promote adequate air-flow to prevent overheating.



The Allen-Bradley 1762-OX6I isolated relay output module operates with an input voltage range of 5 to 265 and 5-125VDC. This module has a bus current draw rang of 110 mA at 5 Volts DC (0.55 kW).

Before installing this module, the environment should be analyzed and studied since the mounting method will depend on the number of shocks or vibrations that the module could receive when operating. There are two ways to mount this module; usually, it can be mounted using a DIN rail with end anchors. The other way to mount this module that is recommended for environments with extreme vibrations is completed by using two Panhead screws per module. After having been mounted, the 1762-OX6I isolated relay output module can be connected to the controller and other I/O equipment using a ribbon cable. The Allen-Bradley 1762-OX6I isolated relay output module has dimensions of 90 x 40 x 87 millimeters (3.54 x 1.58 x 3.43 inches) and it has an approximate shipping weight of 220 grams (0.485 pounds). This module can withstand an operating temperature of 0 to 55 degrees Celsius (-32 to 131 degrees Fahrenheit) and an altitude of 2000 meters (6561 feet).

FAQ for 1762-OX6I

What is the Relay output form of the 1762-OX6I?


The 1762-OX6I has Form C output contacts.

What are the operating voltage range of each of the output channels?


The operating voltage of the output channels are 5-125VDC and 5-265VAC.

What is the installation clearance requirement of the 1762-OX6I?


The 1762-OX6I installation clearance requirement is Six (6) inches on all sides of the module.

Technical Description of 1762-OX6I

OUTPUT MODULE 6POINT ISOLATED HIGH CURRENT

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $355cartAdd to Cart

Our highly skilled technicians can repair your 1762-OX6I. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $355cartAdd to Cart

Our highly skilled technicians can repair your 1762-OX6I. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1762-OX6I such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1762-OX6I/A, Series A, Rev A Request Quote

Common misspellings:
  • l762-OX6I
  • 1762-0X6I
  • 1762OX6I
PDF
Reviews

Reviews for 1762-OX6I

Internal Review

"The Allen-Bradley 1762-OX6I is a Relay output module with form C contact output that are individually isolated. The main advantage of this output module compared to the 1762-OW8 is that each channel of the 1762-OX6I comes with a pair of Normally Open (N.O.) and Normally Closed (N.C.) contact outputs which may be actively used at the same time, to energize and de-energize different loads. This type of circuitry can perform more tasks, compare to the 1762-OW8 that only has a Normally Open (N.O.) contact. " -DO Supply Tech