Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PLC 5 1771-ARC

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-ARC

|

The Allen-Bradley 1771-ARC adapter module is a PLC 5 series remote I/O adapter module. It operates as an interface between the I/O modules and the remote I/O processor in the PLC 5 system that it is installed in. The 1771-ARC remote I/O adapter module can be installed up to 5000 cable feet away from the processor that it is communicating with and its maximum serial communication speed is 25,000 bits per second. It uses 900 milliamps of backplane current at 5 Volts DC. The 1771-ARC remote I/O adapter module can collect output status data and read and transmit input status data.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-ARC

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-ARC
UPC780333868705
Weight1.81 lbs (0.82 kg)
Module TypeRemote I/O Adaptor Module
Number of Module I/O Slots2 Slots
Mount TypeBack Panel
Cable1771-CX1 (1 m), 1771-CX2 (2 m), 1771-CX5 (5 m)
Operating Temperature32-140 F (0-60 C)
Storage Temperature-40-185 F (-40-85 C)
Lower Connector Keying16-18

The 1771-ARC PLC 5 I/O Adapter Module by Allen-Bradley is an I/O adapter module which provides interface between remote I/O distribution panel and the PLC 5 I/O modules and helps collect output image table status data from the distribution panel to easily update the status of outputs terminals of all output modules connected to the PLC 5 I/O Chassis. The 1771-ARC module also reads and transmits input status data from the input terminals of all input modules located on the I/O chassis to the distribution panel. The entire module is located on the I/O chassis adapter slot and uses a serial communication form with a communication rate of 25,000 bits per seconds. The module draws 900mA backplane current at 5V DC and can be placed at a maximum distance of 5,000 cable-feet from the processor. The 1771-ARC module is keyed by connecting the top connector between pin 36 and 38 or connecting the top connector between pins 54 and 56. The 1771-ARC’s operational temperature ranges between 0-60 0C at 5-95% non-condensing relative humidity and it is factory-specified to store under a temperature range of -40-85 0C.

Revision Part #Also known as
1771-ARC Ser A1771-ARC/A, Series A, Rev A
1771-ARC Ser B1771-ARC/B, Series B, Rev B
Don't see your particular revision? Contact us now.