Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-SIM

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-SIM

|
Need a Specific Revision?

The Allen-Bradley 1771-SIM module is an input and output simulation module from the PLC 5 series. This simulation module can be installed in any Allen-Bradley PLC 5 series Bulletin 1771 universal I/O chassis. The 1771-SIM input and output simulation module is often used for input simulation and output indicating. It is a single-slot module with switches that simulate open/close devices. The 1771-SIM input and output module can test programs for their response time to inputs and their response time for turning on and turning off.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-SIM

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-SIM
UPC662468206129
Weight1.69 lbs (0.77 kg)
Module TypeSpecialized I/O Module
Number of Inputs8 Switches
Number of Outputs8 Indicators
Input Voltage RangeN/A
Output Voltage RangeN/A
Slots1
Backplane Current0.2 Amperes
Wiring Arm1771-WN
Typical AC Signal Delay (On)11 (+/- 6) ms
Typical DC Signal Delay (On)3 (+/- 2) ms
Typical AC Signal Delay (Off)29 (+/- 8) ms
Typical DC Signal Delay (Off)30 (+/- 7) ms
View as PDF
Request a Repair

The 1771-SIM PLC 5 Input/output Simulation Module by Allen-Bradley is an input simulation and an output indicating module installed in any slot of the 1771 universal I/O chassis and is used for testing programs for the appropriate response to specific inputs replacing the manual input devices and temporal output test lamps. The module has 8 input simulation switches for replacing the manual input devices and 8 output indicators with a built-in LED for replacing the temporary output test lamps. The module draws 300mA of backplane current at 5V DC and is installed in either the High byte slot or the Low byte slot. The 1771-SIM is keyed to the backplane through the connection between pins 14 and 16, 24 and 26 of the backplane top connector. It has an operational temperature range of 32-140°F at 5-95% non-condensing ambient relative humidity range, without de-rating, and it has a non-operational temperature range between -40 and 185°F. The 1771-SIM module has dimensions of 2in x 6in x 10in and weighs approximately 1lbs.

Revision Part #Also known as
1771-SIM Ser A1771-SIM/A, Series A, Rev A
Don't see your particular revision? Contact us now.