1734-AENTK
This I/O adapter is designed for DIN-rail installation and utilizes the EtherNet/IP communication protocol. Featuring conformal coating for added protection, it operates efficiently within a maximum h
The Allen-Bradley Point I/O 1734 modular system is designed to be different from the standard PLC controller configuration, signal acquisition, and actuator control assignment options. It is made to be an in-cabinet modular I/O platform whose modules can be stacked 1 to another and have 1 to 8 channels configured as analog or digital inputs or outputs. The system also has Ethernet, ControlNet, DeviceNet, or PROFIBUS adapters, RTD and thermocouple units, inputs for receiving signals from 5 Volts or 24 Volts rated encoders, I/O link masters, and RS-232 and RS-485 interface modules. The Point I/O 1734 system can exchange data with the PLCs whether they are installed in the same cabinet or whether they are serving as distributed I/O consoles that are positioned in extremely inaccessible and remote parts of the plant. This flexibility is further enhanced by the fact that safe and standard I/O modules can be installed in the same rack.
The Allen-Bradley Point I/O 1734 modular system in the Allen-Bradley/Rockwell Automation Integrated Architecture allows the users to diagnose each channel individually within any installed module when there is short-circuiting or disconnected wire, and it even supports alarm configuring by the users and filtering options. The system is software supported by the Studio 5000 application software and they have local autonomous control. The modules installed in the Point I/O 1734 system can be removed and inserted under power (RIUP), which is one of the most useful features for automated systems where it is vital to replace defective components. With 2 Ethernet ports, this modular I/O system can be configured as a part of a linear, star, and ring EtherNet/IP network topologies while processing up to 504 channels locally.
Browse available units in our catalog of Point I/O 1734.
This I/O adapter is designed for DIN-rail installation and utilizes the EtherNet/IP communication protocol. Featuring conformal coating for added protection, it operates efficiently within a maximum h
This input module features eight separate inputs, all with individual status indicators. It supports both 2-wire and 3-wire proximity switches, enabling adaptability in various applications. Operating
This module provides an input range from 0 to 600 Ohms and maintains an impressive absolute accuracy of 0.1% at 25 degrees Celsius. Rarely affected by temperature changes, its accuracy drift is rated
This module features an isolation voltage of 50 V and utilizes a sourcing output style. It mounts conveniently on a DIN rail and has electronic protection built in. The module's open style enclosure f
The 1734-IT2IK thermocouple input module accommodates two inputs, each providing individual electrical isolation. Capable of handling thermocouple types B, C, E, J, K, N, R, S, and T, it incorporates
This module features a total of 8 outputs grouped into a single set, with a nominal on-state voltage of 24V DC. The minimum on-state voltage is 10V DC, and it supports a maximum voltage of 28.8V DC. T
This POINT I/O module supports external power bus load sources and offers a standard message size of 1 byte. It is equipped with conformal coating for enhanced environmental protection and consumes a
Designed for seamless DIN rail mounting, this module operates within a signal range of 0 to 10 volts. It includes two I/O points and is capable of isolating voltages up to 50 volts. The supply voltage
This expansion power supply features an input current of 400 mA and can provide up to 1.3 Amps of output current. It is designed for DIN-rail mounting and has an open-style enclosure. The unit comes w
This input module operates with a 24 VDC power supply and accommodates a signal range of 0–10V. It is designed for DIN rail mounting and includes conformal coating for enhanced protection. The open-st