1734D-IA8XOW8
The Allen Bradley 1734D-IA8XOW8 is a POINT I/O POINTBlock AC Input/Relay Output Module. It has 120 Volts AC, 60 Hertz External AC Power Supply and a Relay of Form A N.O, SPST with an Load Minimum of 1
The Allen-Bradley Point I/O 1734 modular system is designed to be different from the standard PLC controller configuration, signal acquisition, and actuator control assignment options. It is made to be an in-cabinet modular I/O platform whose modules can be stacked 1 to another and have 1 to 8 channels configured as analog or digital inputs or outputs. The system also has Ethernet, ControlNet, DeviceNet, or PROFIBUS adapters, RTD and thermocouple units, inputs for receiving signals from 5 Volts or 24 Volts rated encoders, I/O link masters, and RS-232 and RS-485 interface modules. The Point I/O 1734 system can exchange data with the PLCs whether they are installed in the same cabinet or whether they are serving as distributed I/O consoles that are positioned in extremely inaccessible and remote parts of the plant. This flexibility is further enhanced by the fact that safe and standard I/O modules can be installed in the same rack.
The Allen-Bradley Point I/O 1734 modular system in the Allen-Bradley/Rockwell Automation Integrated Architecture allows the users to diagnose each channel individually within any installed module when there is short-circuiting or disconnected wire, and it even supports alarm configuring by the users and filtering options. The system is software supported by the Studio 5000 application software and they have local autonomous control. The modules installed in the Point I/O 1734 system can be removed and inserted under power (RIUP), which is one of the most useful features for automated systems where it is vital to replace defective components. With 2 Ethernet ports, this modular I/O system can be configured as a part of a linear, star, and ring EtherNet/IP network topologies while processing up to 504 channels locally.
Browse available units in our catalog of Point I/O 1734.
The Allen Bradley 1734D-IA8XOW8 is a POINT I/O POINTBlock AC Input/Relay Output Module. It has 120 Volts AC, 60 Hertz External AC Power Supply and a Relay of Form A N.O, SPST with an Load Minimum of 1
The Allen Bradley 1734-ob8sk output module is a Point I/O 1734 series safety output module. It has 8 safety outputs that support single channel and dual channel operation. The 1734-ob8sk output module
This terminal assembly consists of 10 removable screw terminals and is capable of handling field power supply voltages of 120/240 Volts AC or 28.8 Volts DC. It can accommodate currents up to 10 Ampere
This module operates with a voltage range between 10 and 28.8 VDC and achieves a point bus current of 12 mA at 5.1 VDC. The unit supports total power dissipation up to 0.6 W at 28.8 VDC, and thermal d
The Allen Bradley 1734D-IB8XOB8ES is a POINT I/O POINTBlock DC 8 I/O Module. It has 24 Volts DC Voltage and a Power Consumption of 8.2 Watts with a Power Dissipation of 2 Watts.
Featuring 8 digital AC inputs and 8 digital AC outputs, this module operates at a nominal output voltage of 120 VAC and supports a maximum output current of 0.5 A per output. An integrated DeviceNet c
This cable supports 1734 Point I/O modules and operates effectively at a voltage range of 10 to 28.8 volts DC. It withstands vibrations of 5G across a frequency range of 10 to 500 Hertz and is built t
Designed for flexibility, the 1734sc-IF4U module can accommodate input currents from 0-20 mA and 4-20 mA while maintaining a resistance range of 0 to 3000 Ohms. The device operates effectively within
This Point I/O module operates with a power supply voltage of 120 Volts AC, with a POINTBus current rating of 1 Ampere. The device supports a system frequency of 50 to 60 Hertz and is designed for DIN
This distributor module is designed for Point I/O systems and acts as a field potential distributor. With nominal input voltages of 120/240V AC and 12/24V DC, it supports a DC voltage range from 10 to