Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley SLC 500 1746-IV32

Product image is representative; revision or series may vary. Contact us to request a specific version.

1746-IV32

|

The Allen-Bradley 1746-IV32 is an SLC 500 Discrete Input module. This module mainly features thirty-two (32) 24 Volt DC input channels in four (4) groups of eight (8) channels each. It has a backplane current consumption of 0.050 Amperes @ 5 Volts DC. It is a single slot module that directly installs to any SLC 500 chassis.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1746-IV32

ManufacturerAllen Bradley
CategoryPLCs
Product LineSLC 500
Part Number1746-IV32
GTIN10662468092767
Weight0.38 lbs (0.17 kg)
Signal delayON = 3 ms; OFF = 8 ms
Module Type24VDC input module
No. of groups4
Input voltage range15 to 30V dc at 50° C; 15 to 26.4V dc at 60° C
On-state Voltage, min.15.0V dc
Off-state voltage, max5.0V dc
Off-state current, max1.5 mA
Input current5.1 mA at 24V dc
Storage Temperature-40°C to +85°C (-40°F to +185°F)
Operating Temperature0...+60 °C (+32...+140 °F)
Relative Humidity5 to 95% without condensation
Agency CertificationUL / C-UL listed Class I, Division 2, Groups A, B, C, D CE marked for all applicable directives C-Tick marked for all applicable acts
Voltage Range15-30 Volts DC Source
Inputs32
Backplane Current (5 Volts DC)106 milliamps
Off State Current1 milliamp
ApplicationsCombination 120 Volts AC I/O
UPC10662468092767

The 1746-IV32 is an SLC 500 32 Channel Digital Input Module by Allen-Bradley. It is a 24V DC current sourcing input module with 32 inputs and 8 points per fused common that is fixed in any slot of the SLC 500 chassis. It has an operating voltage range between 15 and 30V DC at 50 °C and a range of 15 and 26.4V DC at 60 °C and it has a backplane draw current of 0.05A at 5V DC. The 1746-IV32 has a non-replaceable electronically-fused common with the fuse rated at 2.5A and it provides a 60s 1500V AC-tested isolation from the backplane. The signal delay on the input points has a maximum delay time of 3ms for both the ON and OFF states and the module has a maximum OFF-state current of 1.5mA. It also has a minimum ON-state voltage of 15V DC and a maximum OFF-state voltage of 5V DC. It has a nominal input current of 5.1mA per point and the maximum heat dissipation on each point is 0.2W with an aggregate of 6.65W for the whole module. The 1746-IV32 is CE, CSA, and UL-certified and it provides NEMA standard ICS 2-230 Noise immunity. It is designed and tested to withstand a working vibration of 2.5G at 57-200Hz with a tested peak displacement of 0.015 inches and maintains an optimal function even with an operational shock of 30G. It has a working temperature between 0 and 60 °C at a relative humidity range of 5-95%.

The Allen-Bradley 1746-IV32 is a Discrete Input module that is a component module of the SLC 500 product range. This module is a 24 Volt DC sourcing input module, with thirty-two (32) input channels grouped into four (4) of eight (8) channels each.

Each channel of this module operates at a voltage range of 15 to 30 Volts DC at 50 degrees Celsius and 15 to 26.4 Volts DC at 60 degrees Celsius. It has a backplane current consumption of 0.050 Amperes @ 5 Volts DC and 0 Amperes @ 24 Volts DC with a channel isolation from backplane of 1500 Volts AC for 1 minute.

The module’s channels have a maximum signal delay of 3 milliseconds for both On and Off transition. The minimum on-state voltage is 15.0 Volts DC while the maximum off state voltage is 5.0 Volts DC and maximum off-state current is 1.5 milliamperes. The nominal input current to this module is 5.1 milliamperes at 24 Volts DC. It has an individual channel heat dissipation of 0.20 Watts and total heat dissipation of 0.25 Watts.

The 1746-IV32 is available in four (4) series - specifically, Series A, B , C and D. Series A, B, and C come with a fuse per input common which means that four (4) internally installed, non-replaceable fuses are integral to this series. Series D modules do not have internal group fusing.

The 1746-IV32 may be installed to any SLC 500 chassis. Similarly, it can be used as input module of any SLC 500 processor. It may also be installed in a local I/O rack, extended rack, and distributed I/O rack.

Revision Part #Also known as
1746-IV32 Ser A1746-IV32/A, Series A, Rev A
1746-IV32 Ser B1746-IV32/B, Series B, Rev B
1746-IV32 Ser C1746-IV32/C, Series C, Rev C
1746-IV32 Ser D1746-IV32/D, Series D, Rev D
Don't see your particular revision? Contact us now.