Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley InView 2706-PENETP

Product image is representative; revision or series may vary. Contact us to request a specific version.

2706-PENETP

|
Need a Specific Revision?

The 2706-PENETP communication module works with the EtherNet/IP network and it has been included in the 2706 line of InView panels by Allen-Bradley. The main purpose of this communication module is to integrate an InView display into other networks, enabling it to interact with different equipment.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2706-PENETP

ManufacturerAllen Bradley
CategoryPanelviews
Product LineInView
Part Number2706-PENETP
Weight1.81 lbs (0.82 kg)
TypeCommunication module
NetworkEtherNet/IP
Main equipmentIn-view panels
Compatibility2706-P22R
ConnectorRJ45, 10/100Base-T connector
MountingThird-party DIN rail.
IndicatorsYes. COMM and Fault
Operating temperature0-50 degrees Celsius
Humidity5-95% without condensation
Shocks15 G maximum during operations
Request a Repair

The 2706-PENETP module is a communication module that uses the EtherNet/IP network and that has been included in the 2706 product line of the InView display panels that are made by Allen-Bradley. The main purpose of this communication module is to integrate an InView display into other networks. It enables interaction with different equipment. Some of the activities the display panel can perform with this communication module include sending and receiving data and transferring the data to controllers or other remote panels and PCs. The Allen-Bradley 2706-PENETP communication module is compatible with the 2706-P22R InView industrial LCD panel. This display is surrounded by a NEMA Type 4 enclosure that protects its internal parts from external particles that can enter it and cause damages. This LCD has a red LED matrix.

This module uses a power source rated at 24 Volts DC and it can be mounted on a DIN Rail. Allen-Bradley recommends the use of a third-party DIN Rail. The rail can be a Lantronix or Digi DIN Rail. This network is required so that the panel can be connected easily to a PC and this will guarantee successful control. The Allen-Bradley 2706-PENETP communication module is intended for indoor use only. This means the module cannot be exposed to severe weather conditions and it must not be used in a room with a temperature outside a range of 0 to 50 degrees Celsius or with humidity that condenses or that exceeds a relative level of 95 percent.