Allen Bradley
2711-K6C20L1X
From $1,412
In Stock Ships Today Free UPS Ground on All Parcel Orders!
+1 (919) 205-4392
Allen Bradley Panelview 600
The PanelView Standard 600 Operator Interface Terminals have a 5 inch color flat-panel display with 320 x 234 resolution. The PanelView 600 terminal is designed for safe use when installed in a suitably rated NEMA Type 12, 13, 4X, IP54 or IP65 enclosure. These terminals support operator input via keypad, via touch screen or via keypad with touch screen.
Learn more
Browse Panelview 600
Browse available units in our catalog of Panelview 600.
- Allen Bradley
2711-K6C5L1X
From $1,836In Stock Ships Today - Allen Bradley
2711-T6C3L1X
This HMI operator terminal operates at a voltage range of 18 to 32 VDC and consumes a typical power of 18 watts. It supports communication through DH-485 and RS-232 printer ports. With an internal mem
From $1,879In Stock Ships Tomorrow - Allen Bradley
2711-NL3X
This backlight operates with a lifespan of approximately 50,000 hours at 25 °C (77 °F). It consumes input power in the range of 18 to 32 Volts DC. The unit includes communication options for RS-232 (D
From $389In Stock Ships Today - Allen Bradley
2711-K6C12X
This operator terminal features a display size of 5 inches and delivers visuals at a resolution of 320 x 234 pixels. It operates on a voltage input of 85 to 264 VAC and offers communication options th
From $1,482Available - Allen Bradley
2711-NV5
This antiglare overlay is explicitly designed for touch input. It aims to improve screen readability by minimizing glare effects. Operating temperatures range from 0°C to 40°C, and it supports humidit
AvailableCall - Allen Bradley
2711-K6C9L1X
This operator terminal includes essential features such as a 5-inch display with a resolution of 320 x 234 pixels and a memory capacity of 240 KB. It operates efficiently at temperatures from 0 to 50
From $3,390In Stock Ships Today - Allen Bradley
2711-B6C3L1X
This model operates reliably within an ambient temperature of 0 to 55 °C. It utilizes a power supply with a nominal input voltage of 24 VDC and supports an operating voltage range from 18 to 32 VDC. C
From $5,722In Stock Ships Today - Allen Bradley
2711-T6C2
Boasting a resolution of 320 x 234 pixels, this panel has 128 touch cells within the touchscreen matrix. The device offers Ethernet/IP communication at 10/100 Mbps via an RJ-45 port, alongside an RS-2
From $3,165In Stock Ships Today - Allen Bradley
2711-T6C8
This specific model operates between a minimum supply voltage of 85 VAC and a maximum of 264 VAC. Communication options include DH+ and RS-232 printer ports, enhancing connectivity. The memory consist
From $2,031Available
Showing 111-120 of
133
results
About Panelview 600
The Panelview 600 series is a series of standard operator terminals designed and built by Allen-Bradley. These operator terminals feature pixel graphics capabilities with displays that are color active-matrix TFT displays. The Panelview 600 terminals feature keypad and touchscreen operator input options, with units that support both input types together or keypads only for input. The display area measures 115 x 86 millimeters, while the resolution is 320 x 234 and 320 x 240 pixels. These units feature 128 touch cells and come with actuation ratings of 1 million presses. The Panelview 600 terminals also come with 10 function keys and they support real-time clocks that are battery-backed clocks and they support timestamps to provide critical data. The Panelview 600 terminals come with a replaceable battery and the application memory is 190 KB of application runtime memory with 240 KB of non-volatile memory.
The operator terminals feature optional ATA memory card support. The units come with pre-installed PanelBuilder32 software that runs on personal computers. The units support various communication ports such as the EtherNet/IP, DeviceNet, ControlNet, DH+, Remote I/O, DH-485, RS-232, and the DF1 ports. The Allen-Bradley Panelview 600 terminals also support the RS-232 printer port and they run on an input voltage of 18 to 32 Volts DC. The input voltage range is 85 to 264 Volts AC and the power consumption rating is 60 Volts maximum. The Panelview 600 terminals feature color or grayscale graphic displays and they are base-configured units. The communication ports provide add-on capabilities to the base-configured units with modular communication interfaces.
PanelView 600 Startup Failure
If your PanelView 600 fails to startup properly, always check the power supply first. Ensure the terminal is receiving the correct voltage and that the wiring and connections to the power source are valid. In addition, you should also ensure the DC power positive and negative are attached to the proper terminals.
PanelView 600 Status Indicators
The status indicators are located on the back of your PanelView 600 terminal. The COMM indicator is green and reflects communication. The FAULT indicator is red and reflects hardware faults. Upon startup, the fault indicator should be off and the comm indicator on. If the fault indicator flashes a few times at startup, this is not a concern. However, if both indicators are off you should check the power cable. See the table below to interpret the terminal's indicator status:
| Indicator | Status | Meaning |
| Comm | On | Normal Operation |
| Off |
Fault Present- Ensure controller is in run mode. Check baud settings of controller/terminal. Check for proper controller connections. |
|
| Blinking | Failed to establish communication | |
| Fault | On |
Fault Present - Restart terminal. If the error persists, the terminal requires servicing. Click here for information about DO Supply's repair service. |
| Off | Normal Operation | |
| Blinking | No applications loaded/application is corrupt. Reload the application. |
| Indicator | Status | Meaning |
| Comm | On | Normal operation |
| Off | Hardware failure | |
| Blinking | Failed to establish communication | |
| Fault | On | Hardware failure. |
| Off | Normal operation | |
| Blinking | Application not loaded/application is corrupt |
| Indicator | Status | Meaning |
| Comm | On | Normal operation |
| Off | Communication non-functional | |
| Blinking | Failed to establish communication, PLC may be in program mode | |
| Fault | On |
Fault Present - Check baud rate and rack settings. Ensure proper connections from terminal to controller. Verify remote I/O is enabled. |
| Off | Normal Operation | |
| Blinking | Application not loaded/application is corrupt |
PanelView 600 Application Issues
| Issue | Possible Cause | Action |
| Failed Application Download (Initial Attempt) | Disconnected Communication Cable | Check cable type and connection |
| Improper Computer COM Port Selection | Ensure you have the correct COM port number in PanelBuilder32 or WinPFT software | |
| Communication Settings/Rate Incorrect | Ensure computer and terminal share the same communication settings | |
| Failed Application Download (Subsequent Attempts) | Communication Settings/Rate Incorrect | Ensure computer and terminal share the same communication settings. Adjust settings in the Communication Setup screen |
| Application File Name Appears as ******* | Invalid Application | Redownload application |
| Unusable Application Due to Error | Download new application | |
| Failed Application Transfer from Memory Card | Memory card incorrectly installed | Reinstall, verify its installed correctly |
| Application to Large for Terminal Memory | Reduce application size | |
| Incorrect Data Checksum | Ensure memory card is properly seated. It is possible the application may be corrupt | |
| File Format Invalid | Verify file format (.PVA) | |
| Failed Application Transfer to Memory Card | Memory card incorrectly installed | Reinstall, verify its installed correctly |
| Memory Card May be Wire Protected | Change memory card protection switch | |
| Another File on the Memory Card | Erase/reformat card | |
| Application to Large | Reduce application size, erase/reformat card | |
| Memory Card Format Invalid | Replace/reformat card | |
| Incorrect Data Checksum | Ensure card is installed correctly | |
| Application Does Not Exist | Ensure application exists |
Repair Your PanelView 600
Here at DO Supply, we offer repair services for your Allen-Bradley products, such as the Allen-Bradley PanelView 600. For more information or to request a quote, click here.