2711P-RDB12C

The Allen-Bradley visualization component with part number 2711P-RDB12C is display module that is a replacement part for the pre-installed module in every PanelView Plus 1250 / PanelView Plus 6 1250 Touch and Keypad, colored display terminal.

This display module features a 12.1-inch colored screen having resolution of 800 x 600 pixels and effective area display of 246 x 184 mm (9.69 x 7.25 in). The main purpose of a display module is to provide process visualization as well as the touch and keypad control interfaces.

The display module is easily the most exposed and used part of an operator terminal. For this reason, the display module is recommended to be operated using a gloved finger or a stylus. When unavoidable, operate the device with a finger free of contaminants such as oil, grease, dust especially corrosive chemicals. This display module may also be cleaned with a soft cloth soaked with mild soap and isopropyl alcohol. Optionally, Human Machine Interface (HMI) window kits may be used for an increased protection to the component. These window kits has a swing door and a lock that may be used not only to protect the unit but prevent unwanted access to the operator terminal.

The display module has configurable properties under the operator terminals screen display settings. This display module may be calibrated and adjusted with brightness. Replace display modules if the screen is unable to show graphics even if the contrast and brightness are at the maximum position. Similarly, a damage display module will definitely require replacement.