The GE Emerson PACSystems RSTi-EP series includes standalone PLCs, backplane PLCs, and remote I/O systems. These systems are designed for industrial automation applications and can connect to Fieldbus structures using network adapters. One RSTi-EP station can support up to 64 active I/O modules. Both active and passive I/O modules are available in the PACSystems RSTi-EP series. Passive I/O modules do not support fieldbus communication. The PACSystems RSTi-EP series also includes functional safety modules, end plates, and endbrackets.
Browse available units in our catalog of PACSystems RSTi-EP.
As part of the PACSystems RSTi-EP series, this module offers isolated outputs with an output current range extending from 0 to 20 milliamps. The device converts data in a 16-bit (2’s complement) forma
This analog input module accommodates a total of eight inputs, allowing for current measurements in either the 0 to 20 milliamps or 4 to 20 milliamps range. It draws 8 milliamps from the system curren
This analog input module supports four inputs and possesses a 16-bit resolution for accurate data acquisition. It allows adjustable speeds ranging from 36 to 240 mS, accommodating various operational
As a digital output module, the EP-2218 operates on a positive logic system. This module allows a maximum output current of 4A across all points. It uses a 2-wire configuration for wiring and is capab
The EP-3704 module has an input circuit resolution of 16 bits and supports a maximum current rating of 8.0 milliamps from system paths. It includes short-circuit protection, reverse polarity protectio
This serial communication module operates within a supply voltage range of 20.4 to 28.8 Volts DC. It boasts a bus transfer rate of 48 Mbps and a flexible serial transfer rate ranging from 300 to 11520
This model operates on a supply voltage ranging from 20.4 to 28.8 volts DC, sourced from the system bus, ensuring efficient energy use. It includes a high-speed transfer rate of 48 Mbps for data trans
Part of the RSTi-EP series, the EP-8360 connector set features 4 poles per connector and includes 8 connectors in total. Compliant with the IP 20 ingress protection rating, these connectors are suitab
Designed for RSTi-EP stations, the DIN rail termination kit includes two end brackets to fix the system to the DIN rail securely and one endplate to protect contacts on the final module in the series.
This Profinet network adapter boasts a maximum input and output data width of 512 bytes each. It can handle parameter data of up to 4362 bytes and diagnostic data of 1408 bytes. The adapter supports P