IC200CPU001

The IC200CPU001 is a compact controller from the VersaMax series from Emerson Automation, formerly by GE Intelligent Platforms (GE IP). This is a DIN rail or panel mounted Central Processing Unit (CPU) module that is capable of processing up to 2048 Discrete inputs, 2048 Discrete outputs and a 34 Kbytes of memory that can be allocated for user program, Analog Input and Analog Output data as well as internal registers. This CPU is also equipped with 1024 points of discrete internal bits, 256 points of discrete temporary bits, and 1280 points of Global discrete bits. The IC200CPU001 has typical Boolean execution speed of 1.8 ms / K. It supports Floating point math calculation and data processing, Override functions and comes with a battery-backed Real-Time Clock (RTC) with accuracy of 100ppm (0.01%) or +/- 9sec/day applicable for internal timer and counter instructions and 23ppm (.0023%) or +/- 2sec/day @ 30C; 100 ppm ((0.01%) or +/- 9sec/day @ full temperature range applicable in logic scheduling or schedule based logic sequences. The integrated communication ports available to the IC200CPU001 are One (1) RS232 and One (1) RS485 communication interfaces. These interfaces support a variety of industrial communication protocols such as SNP Slave, RTU Slave and Serial I/O which can be used in implementing distributed I/O architecture, data exchange between Human Machine Interface (HMI), Supervisory Control and Data Acquisitions (SCADA) systems and other applicable and compatible partner devices. These CPU module is configured using CIMPLICITY Machine Edition Logic Developer, VersaPro or Control programmer.

The IC200CPU001 CPU is a user-configurable CPU manufactured by GE Fanuc. It comes with 2 serial ports and 34 KB of configurable memory. The CPU uses non-volatile memory for storing programs. It supports programming in ladder diagrams and instruction lists. It comes with 1024 points for discrete internal bits and 256 points for temporary bits. The global discrete bits of the CPU include 1280 points. The boolean execution speed of the CPU is 1.8 ms/K. The IC200CPU001 CPU supports both floating point and override. The CPU is equipped with built in RS-232 and RS-485 ports. For internal communication, the CPU uses the SNP slave and the serial I/O protocol. The memory of the CPU is battery-backed and it features a real time clock. The clock timestamps critical time events during the operation. The real-time clock accuracy if 100 ppm at a full temperature range. The GE Fanuc Versamax IC200CPU001 CPU can be easily mounted by using a DIN rail with the power supply. The IC200CPU001 CPU is designed with 32 modbus registers, an enhanced PID function block, and a higher communication output than other CPUs. The CPU has a backplane current consumption rating of 140 milliamps for 5 Volts and 100 milliamps for 3.3 Volts. The front side has LED indicators for different system events. The serial ports of the IC200CPU001 CPU are user configurable by using software. The ports can automatically switch between the RTU and SNP slave mode when needed. A CPU run/stop mode switch is present on the front side behind the module door. It is used to start the CPU or stop it.