R7851C1008
With a flame signal output range from 0 to 5.0 volts DC, this flame amplifier boasts a response time of either 0.8 seconds or 3.0 seconds for flame failure detection. It is primarily used in commercia
The Honeywell 7800 Series is a line of burner control modules that can control many types of automatic-fired burners. They can be used in automatically fired oil, gas, and combination fuel applications that include single burners. The 7800 Series burner control modules support maximum ambient temperatures of 60 degrees Celsius and maximum relative humidity ratings of 85%. These burner control modules support optional plug-in modules for custom applications. The 7800 Series burner control modules are compatible with most Honeywell flame rods and optical flame detectors. They include keypads and status LEDs on the front panels.
Browse available units in our catalog of 7800 Series.
With a flame signal output range from 0 to 5.0 volts DC, this flame amplifier boasts a response time of either 0.8 seconds or 3.0 seconds for flame failure detection. It is primarily used in commercia
This relay control module is utilized in on-off primary burner control applications, featuring both pre-purge and programmable post-purge capabilities. It has a pilot flame establishing period that ca
Designed for robust performance, this burner control module has a temperature range that spans from a minimum of -40°C to a maximum of 60°C during operation, while storage temperatures can range from
This relay control module weighs 1.81 lbs and functions within a minimum frequency of 50 Hz and a maximum of 60 Hz. It has the option to set the pilot flame establishing period to either 4 seconds or
Designed to reliably establish flame, this device can handle a maximum connected load of 2000 VA. It features a 10-second flame establishment period and operates efficiently in temperatures ranging fr
This burner control functions within a voltage range of 120 VAC and is suitable for frequencies between 50 Hz and 60 Hz. It features a pilot flame establishing period of 3 seconds and a main flame est
This diagnostic tester supports an input voltage frequency of 50/60 Hz. It works within a temperature range from -18°C to 49°C during operation, while it can withstand storage conditions between -34.5
This burner control unit operates within a frequency range of 50 to 60 Hz. It includes a postpurge interval of 15 seconds and specifies a pilot flame establishment period of 4 to 10 seconds, followed
This control device is characterized by its compact form and efficient operation, supporting a maximum power dissipation of 10 watts. It has an operating temperature range from -40°C to 60°C, while st
This UV flame amplifier features a lightweight design, weighing in at 0.28 lbs, and is known for its blue housing. It is suitable for use with Honeywell 7800 Series Relay Modules, making it versatile