Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Honeywell HercuLine 2000 2000-200-150-126-015-00-000000-0-0-00

Product image is representative; revision or series may vary. Contact us to request a specific version.

2000-200-150-126-015-00-000000-0-0-00

|
Need a Specific Revision?

The Honeywell 2000-200-150-126-015-00-000000-0-0-00 is a smart actuator engineered for efficient operation. Weighing 25 lbs, it is characterized by a basic motor configuration without integrated electronics and is capable of delivering a rated torque of 22.5 Nm with a rotation limit of 150 degrees.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 2000-200-150-126-015-00-000000-0-0-00

ManufacturerHoneywell
Product TypeSmart Actuator
Product LineHercuLine 2000
Part Number2000-200-150-126-015-00-000000-0-0-00
Motor SelectionBasic motor (no electronics)
Rated Torque22.5 Nm
Rotation150 Degrees
Input Frequency60 Hz
Power Supply100-130 VAC
Phase TypeSingle Phase
Analog Input Signals3-Wire Drive Up/Down
Analog Output SignalsDual 1000-Ohm signals (1000 Ohms over 150 degrees)
Shipped RotationCounterclockwise shaft rotation with increasing signal
Relay OutputNot Available
Relative Humidity Range0% to 99% (Non-Condensing)
Communication InterfaceNot Available
Storage Temperature Range-40 °C to 93 °C
Request a Repair

Honeywell’s part number 2000-200-150-126-015-00-000000-0-0-00 belongs to the HercuLine 2000 series, representing an advanced actuation solution. With a weight of 25 lbs, this smart actuator employs a basic motor setup without onboard electronics. It achieves a rated torque of 22.5 Nm, providing effective performance for dynamic applications with a rotation capability of 150 degrees.

The power supply requirement is within the range of 100 to 130 VAC, allowing for compatibility with common electrical systems, while a single-phase input leads to straightforward integration. The actuator is designed to operate at an input frequency of 60 Hz, which is typical for industrial applications.

Analog control is facilitated through a 3-wire drive that enables up/down movement, and it produces dual analog output signals using 1000-ohm resistances across its full range of movement. During shipment, the actuator is set to rotate counterclockwise in response to increasing input signals.

This device does not provide a relay output, making it suitable for direct applications without relay intervention. Designed to function optimally in a variety of conditions, the actuator can handle relative humidity levels from 0% to 99% without condensation affecting performance. It can also withstand a wide storage temperature range from -40 °C to 93 °C, ensuring reliability in extreme climates.