2000-050-090-126-000-20-000000-0-0-0
This actuator features a basic motor without electronic components, ensuring straightforward operation. It offers a torque output of 6.0 Nm and operates at an input frequency of 60 Hz. The device incl
Call
5.0
Free UPS Ground on All Orders!
+1 (919) 205-4392
Honeywell HercuLine 2000
Honeywell's HercuLine 2000 series electric actuators are low-torque actuators rated for 50 to 400 pounds on an inch of torque. They also include microprocessor-based EEUs (Enhanced Electronics Units) and are suitable for positioning dampers and quarter-turn butterfly valves. The HercuLine 2000 actuators support Modbus RTU and RS485 communication, and they can also integrate into HART communication systems. These actuators can start and stop quickly, reducing dead time and the chances of overshooting. They support non-contact position sensing for high repeatability (up to 0.2% of the span.) The HercuLine 2000 actuators can operate at up to 99% non-condensing relative humidity.
Learn more
Browse HercuLine 2000
Browse available units in our catalog of HercuLine 2000.
2000-100-150-126-000-20-000000-0-0-0
This actuator operates on a single-phase system with an input frequency of 60 Hz. It includes two auxiliary switches for added functionality and handles analog input signals using a 3-wire drive for u
Call
5.0
2000-200-090-126-019-00-011000-0-0- 00
This actuator operates on a single-phase power supply ranging from 100 to 130 VAC and has an input frequency of 60 Hz. It employs a 3-wire drive system for upward and downward movement, facilitating u
Call
5.0
2000-200-150-126-000-00-000000-0-0-00
This actuator operates at an input frequency of 60 Hz and offers a rotation capability of 150 degrees. The device utilizes analog input signals with a 3-wire drive for up and down movement. It can wit
Call
5.0
2000-200-150-126-015-00-000000-0-0-00
This actuator operates on a single-phase power supply of 100-130 VAC and has an input frequency of 60 Hz. It features a 3-wire drive for analog input operation and provides dual analog output signals
Call
5.0
2000-400-090-126-019-20-000000-0-0- 0
This actuator operates on an input frequency of 60 Hz and requires a single-phase power supply of 100-130 VAC. It weighs 25 lbs and does not include advanced electronic components in its motor selecti
Call
5.0
2000-400-150-126-000-00-000000-0-0-00
This smart actuator features basic motor selection without electronics, providing reliable performance for various tasks. It allows for a rotation of 150 degrees and operates at an input frequency of
Call
5.0
2000-400-150-126-015-20-000000-0-0-0
The actuator provides a rotation range of 150 degrees and is powered by a supply voltage of 100-130 VAC. It supports single-phase input at 60 Hz and features a basic motor with no integrated electroni
Call
5.0
2000-400-150-126-015-20-010000-0-0- 0
This actuator boasts a rated torque of 45.0 Nm and rotates up to 150 degrees. It operates on single-phase power, with a supply range of 100 to 130 VAC and an input frequency of 60 Hz. The device featu
Call
5.0
51451397-501
This actuator CPU board features a compact design that allows for simple chassis snap-in mounting. It includes a 10-position plug and a top cover gasket. Communication is facilitated via HART and Modb
Call
5.0
Showing 1-10 of
10
results