MR-J2S-22KB-PX078
This servo drive incorporates extensive heat radiation requirements, needing 167 to 209 square feet of space to release heat, depending on the servo motor employed. It has an inrush current of 235 Amp
The MELSERVO MR-J2 or MELSERVO-J2 series of AC servo amplifiers from Mitsubishi contains servo amplifiers that support general-purpose interfaces. Some of the servo amplifiers in this series also support a built-in positioning function. The MR-J2 servo amplifiers are compatible with a variety of Mitsubishi Bulletin HC servo motors. The MR-J2 servo amplifiers have structures with IP00 ingress protection ratings. The brake option for the MR-J2 servo amplifiers is a built-in dynamic brake.
Browse available units in our catalog of MELSERVO MR-J2.
This servo drive incorporates extensive heat radiation requirements, needing 167 to 209 square feet of space to release heat, depending on the servo motor employed. It has an inrush current of 235 Amp
Designed for a voltage rating of 200-230V AC at 50/60 Hz, the MR-J2S-11KA features a capacitor discharging time of 4 minutes. The device weighs approximately 16 kg (35.3 lbs.) and has a load inertia m
This servo amplifier supports a maximum input frequency of 50 to 60 Hertz. It can handle a position control command input rate of up to 10 mega points per second. With an IP00 open enclosure rating, i
This drive module operates with an output current of 2.3 amps and provides 170 volts AC voltage at an output frequency range of 0 to 360 hertz. A built-in dynamic brake enhances control, and the open
This device operates within a voltage range of 4.85VDC to 5.25VDC, rated for a current of 0.3A. The power supply can either come from a servo amplifier or an external source. Additionally, it supports
This drive unit utilizes either a Sine-Wave PWM or a current control system for effective operation. It includes a built-in dynamic brake and offers multiple protective features. Designed with an open
This position controller operates with a voltage of 3-phase 200-230VAC or single-phase 230VAC. It accommodates 3-phase voltage fluctuations from 170 to 253VAC. It maintains frequency stability within
This servo amplifier offers an input current of 95 A and can deliver an output current of 126 A. It operates within a frequency range of 50 Hz to 60 Hz and utilizes the SSCNET communication interface.
This device supports a wide input voltage range, with 3-phase inputs from 200 to 230 volts and 1-phase inputs at 230 volts AC. It accepts voltage fluctuations for 3-phase operations between 170 to 253
This module supports an input current of 0.2 A and features an SSCNET interface. The MR-J2-MD01 enables real-time adjustments to servo gains through its auto-tuning option. The MR Configurator tool fa