MR-J2H-BUS5M
This 5-meter bus cable features 20 cores arranged in 10 pairs, suitable for maintenance junction card connections. It uses 10120-6000EL connectors and requires a shell kit identified as 10320-3210-000
Call
4.6
Free UPS Ground on All Orders!
+1 (919) 205-4392
Mitsubishi MELSERVO MR-J2
The MELSERVO MR-J2 or MELSERVO-J2 series of AC servo amplifiers from Mitsubishi contains servo amplifiers that support general-purpose interfaces. Some of the servo amplifiers in this series also support a built-in positioning function. The MR-J2 servo amplifiers are compatible with a variety of Mitsubishi Bulletin HC servo motors. The MR-J2 servo amplifiers have structures with IP00 ingress protection ratings. The brake option for the MR-J2 servo amplifiers is a built-in dynamic brake.
Learn more
Browse MELSERVO MR-J2
Browse available units in our catalog of MELSERVO MR-J2.
MR-J2S-CLP01
This device operates within a voltage range of 4.85VDC to 5.25VDC, rated for a current of 0.3A. The power supply can either come from a servo amplifier or an external source. Additionally, it supports
In Stock Ships Today
5.0
MR-J20-MA1-UL
The MR-J20-MA1-UL operates at an output power of 200W and is suitable for single-phase input. Designed for both general-purpose and specific applications, it is compliant with UL and CSA standards. It
Available
5.0
MR-J2-60B-S73
The MR-J2-60B-S73 is an advanced servo drive with a dynamic brake feature. Capable of supporting SSCNET, it operates within input voltages of either 200-230V AC for three-phase systems or 230V AC for
Call
4.4
MR-J200A-UL
This Mitsubishi device is UL Listed for safety and operates efficiently at frequency levels of 50/60 Hz. Its power capacity reaches up to 3.5 kVA. Designed to function within a temperature scope from
Available
4.7
MR-J2S-350B4
This servo amplifier is engineered for use with the SSCNET Bus Control system. It operates within a frequency range of 50 to 60 Hz, with forced ventilation cooling enabled by an integrated fan. The de
Available
4.6
MR-J2S-700B-PD030
Designed to operate under a 3-phase voltage supply, the MR-J2S-700B-PD030 has an input voltage range of 200 to 230 VAC. The drive accommodates input voltage fluctuations from 170 to 253 volts and expe
Call
4.6
MR-J2-100ES96
Operating with a supply voltage range from 200 VAC to 230 VAC, this servo amplifier functions effectively within frequencies of 50 to 60 Hz. It supports a relative humidity of up to 90% without conden
Call
4.8
MR-J2-40A9002
The MR-J2-40A9002 provides 400 watts of power with a voltage range from 200 to 230V AC, accommodating both 1-phase and 3-phase applications. It features a torque limit input and can handle significant
Call
4.4
MR-J2-40CX1
This AC servo amplifier can accept a position command input configured for one point with a standard point table holding three entries, extendable to a maximum of 15 points. A four-digit, seven-segmen
Call
4.8
Showing 131-140 of
401
results