MR-J2S-100B-S276
The Mitsubishi MR-J2S-100B-S276 provides an output of 1000 watts and supports 3-phase AC voltage between 200 and 230 volts. It is designed for use in environments with ambient operating temperatures r
Call
5.0
Free UPS Ground on All Orders!
+1 (919) 205-4392
Mitsubishi MELSERVO MR-J2
The MELSERVO MR-J2 or MELSERVO-J2 series of AC servo amplifiers from Mitsubishi contains servo amplifiers that support general-purpose interfaces. Some of the servo amplifiers in this series also support a built-in positioning function. The MR-J2 servo amplifiers are compatible with a variety of Mitsubishi Bulletin HC servo motors. The MR-J2 servo amplifiers have structures with IP00 ingress protection ratings. The brake option for the MR-J2 servo amplifiers is a built-in dynamic brake.
Learn more
Browse MELSERVO MR-J2
Browse available units in our catalog of MELSERVO MR-J2.
MR-J2-350B-S30
This servo drive is rated for a power output of 3500 watts and supports SSCNET communications. It can function within an operating temperature range of 0 to +55°C and is rated for storage temperatures
Call
4.8
MR-J2-40CS116
This servo amplifier operates within an acceptable frequency variation of ±5% and is rated for contamination level II according to IEC60664-1 standards. Its capacitor discharge is managed in around tw
Call
5.0
MR-J2-70C-S100
Designed in the MELSERVO MR-J2 series, this servo amplifier supports a frequency range of 50/60 Hz and provides a speed frequency response of 250 Hz or higher. It features a built-in dynamic brake and
Call
4.5
MR-J2-HBUS30M
This bus cable is compatible with the Mitsubishi MELSERVO MR-J2 series. It provides excellent flexibility and incorporates EMI shielding to prevent interference. It is designed for a maximum ambient t
Call
4.6
MR-J2S-10A-S075
This amplifier operates effectively on a 3-phase AC input with a 200 to 230-volt voltage range and can handle voltage fluctuations from 170 to 253 volts. For users relying on a single-phase system, it
Call
5.0
MR-J2-100CS100SP
This servo amplifier supports voltage fluctuations ranging from 170 VAC to 253 VAC, ensuring stable performance under varying conditions. It features a minimum speed frequency response of 250 Hz and i
Call
5.0
MR-J2M-BU4-EB
Designed to accommodate four slots, the MR-J2M-BU4-EB enables a maximum servo motor connection capacity of 1600 watts, with a continuous capacity rating of 1280 watts. It operates on voltages from 200
Call
4.8
MR-J2S-40AS061
This component functions on an input voltage of 200 to 230V AC for three-phase systems or 230V AC for single-phase setups. The frequency rating is compatible with both 50 and 60 Hz. The MR-J2S-40AS061
Call
4.7
MR-J2S-70BSPR
Operating within the 200V class, the MR-J2S-70BSPR has power supply voltage ratings of 230V AC for single-phase and 200-230V AC for three-phase connections. It can function in temperatures ranging fro
Call
4.6
Showing 251-260 of
401
results