MR-J2-40B-S73
Specifically engineered for the MELSERVO MR-J2 series, this position controller supports SSCNET connectivity. It can accommodate single-phase input voltages of 230VAC with fluctuations between 203 and
Call
4.4
Free UPS Ground on All Parcel Orders!
+1 (919) 205-4392
Mitsubishi MELSERVO MR-J2
The MELSERVO MR-J2 or MELSERVO-J2 series of AC servo amplifiers from Mitsubishi contains servo amplifiers that support general-purpose interfaces. Some of the servo amplifiers in this series also support a built-in positioning function. The MR-J2 servo amplifiers are compatible with a variety of Mitsubishi Bulletin HC servo motors. The MR-J2 servo amplifiers have structures with IP00 ingress protection ratings. The brake option for the MR-J2 servo amplifiers is a built-in dynamic brake.
Learn more
Browse MELSERVO MR-J2
Browse available units in our catalog of MELSERVO MR-J2.
MR-J2-D75CBL15M
The MR-J2-D75CBL15M cable is specifically engineered for use in Mitsubishi's MELSERVO MR-J2 series, offering effective EMI shielding. It is suitable for indoor environments without direct sunlight exp
Call
4.7
MR-J20A1
This servo amplifier operates on a single-phase AC power supply, accepting input voltages between 100 and 115 volts AC. It has a frequency range of 50 to 60 Hertz and is rated at 1.3 amps. Compatibili
Call
5.0
MR-J2S-100B-S276
The Mitsubishi MR-J2S-100B-S276 provides an output of 1000 watts and supports 3-phase AC voltage between 200 and 230 volts. It is designed for use in environments with ambient operating temperatures r
Call
5.0
MR-J2S-200CPS100
This servo amplifier includes a built-in positioning function, enhancing control capabilities. It is rated for circuit breaker settings of 30 frames with a maximum of 20 amps and supports fuse ratings
Call
4.5
MR-J2S-20CL1
This AC servo amplifier from the MELSERVO MR-J2 series operates on a single-phase power supply with a voltage classification of 100V. It allows permissible voltage fluctuations between 85 and 127 VAC
Call
4.7
MR-J2S-20CP1S084
This Mitsubishi servo drive features a dynamic braking system and built-in positioning capabilities. It supports motion table configurations and has an operational temperature range from 0 to 55 degre
Call
4.4
MR-J2S-10CP1S084
This position controller can handle input voltages between 100 and 120 VAC and frequencies of 50 to 60 Hz, with a permissible fluctuation of ±5%. Its dynamic brake is built-in, allowing for effective
Call
4.7
MR-J2S-100BQF
Capable of operating with a power supply voltage of 200 to 230VAC, this servo amplifier supports SSCNET connectivity. The operating temperature can vary from 0 to 55 degrees Celsius, while the storage
Call
4.7
MR-J2S-20BEB
This servo drive unit features a built-in dynamic braking system and operates with a sine-wave PWM control system complemented by a current control component. It has a self-cooling design and comes in
In Stock Ships Tomorrow
5.0
Showing 271-280 of
402
results