- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Kinetix 6000 Repair
We offer extensive repairs for your Kinetix 6000. We keep many spare parts in stock so that we can repair your Kinetix 6000 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Kinetix 6000 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Kinetix 6000 parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse Kinetix 6000 Repairs
Browse our catalog of repairable Kinetix 6000 parts to get a quote.
2090-CPBM4E2-10TR
This transition cable features a bayonet connector type for drives and a threaded DIN connector type for motors. It includes shielding for enhanced signal integrity and is constructed with a TPE jacke
Call
2090-CPBM4E2-14TR
The 2090-CPBM4E2-14TR cable is a motor wire cable manufactured by Allen-Bradley. It comes with brake wires.
Call
2090-CPBM7DF-02AA09
This cable features an orange jacket and is constructed from industrial thermoplastic elastomers (TPE), enabling protection against environmental factors with an IP67 rating. It is equipped with a Spe
Call
2090-CPBM7DF-04AA30
This cable is part of the Kinetix 6000 series. It functions primarily to supply motor power, incorporating brake wiring. Designed with a drive-end flying lead and a DIN connector for the motor side, t
Call
2090-CPBM7DF-06AA15
This single cable features a standard flex rating and is built with an industrial-grade TPE jacket that is colored orange for visibility. The cable contains six conductors, with a power wire gauge of
Call
2090-CPBM7DF-08AA30
This Kinetix 6000 cable features a SpeedTEC DIN connector on the motor end, with a diameter of 1.8 inches, and uses flying leads for the termination at the drive end. It has a wire gauge of 8 AWG and
Call
2090-CPBM7DF-10AA12
This cable utilizes a flying-lead connector at the drive end and a SpeedTec DIN connector at the motor end, facilitating straightforward connectivity. It is rated for both storage and operating humidi
Call
2090-CPBM7DF-10AA40
This standard cable features six conductors and is constructed using 10 AWG wire. It supports an amperage of 35.6 A and operates in temperatures ranging from -30 °C to +80 °C, with a storage temperatu
Call
2090-CPBM7DF-10AF12
This motor power and brake cable is constructed with eight individual conductors. The power conductors feature a size of 10 AWG, while the brake conductors are sized at 18 AWG. It operates within a te
Call
2090-CPBM7DF-16AA90
The 2090-CPBM7DF-16AA90 motor power cable with brake wires designed by Allen-Bradley is used with the 2090 series servo motors. This standard (non-flex) cable features a 16 AWG wire size and a cable d
Call
Showing 1-10 of
92
results
About Kinetix 6000
The Kinetix 6000 series multi-axis servo drives are manufactured by Allen-Bradley and they are compatible with most motors and actuators from the same company. This family of products includes drives with integrated axis modules and plain axis modules with 2 different voltages for each module. The continuous output ratings and slot use vary according to the frame and capacity of each drive. The motor power and feedback cables need to be chosen and compared before attempting to install any of the Allen-Bradley Kinetix 6000 series multi-axis servo drives. Other accessories such as slot-filter modules and AC line filters are required to perform the installation of the drives. These can be chosen from the Allen-Bradley 2094 series. These drives are composed of both a power module and a control module.
The Allen-Bradley Kinetix 6000 series multi-axis servo drives need to be installed by qualified technicians. When mounting the drives, the enclosures or panels must be on flat, rigid, vertical surfaces and they cannot interfere with the ambient air temperature range because the drives need to be maintained in optimum conditions at all times while operating. After mounting the Allen-Bradley Kinetix 6000 series multi-axis servo drives, power rails must be applied and then the cables need to be properly connected to both the motors or actuators, the ground systems and some fuses or circuit breakers that are installed near the drive. It is also necessary to attach the drives to a ControlLogix or CompactLogix EtherNet/IP module so they can send and receive proper signals. The drives also come with status indicators that show errors that occur during the process.