- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 140G MCB Repair
We offer extensive repairs for your 140G MCB. We keep many spare parts in stock so that we can repair your 140G MCB as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your 140G MCB and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your 140G MCB parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse 140G MCB Repairs
Browse our catalog of repairable 140G MCB parts to get a quote.
140G-K15I4-D40
As part of the K frame series, the 140G-K15I4-D40 utilizes electronic LSIG protection and includes four poles. The device operates with a rated insulation voltage of 1000 volts and withstands impulse
Call
140G-K15K3-D30
This K-frame circuit breaker features electronic LSIG and MM protection and operates with a rated current of 300 Amps. It has a rated insulation voltage of 1000 V and withstands impulse voltages of 8
Call
140G-K15K3-D40
This molded-case circuit breaker features electronic LSIG and MM protection and boasts a rated insulation voltage of 1000 volts. It can handle impulse withstand voltages of up to 8 kV. The device weig
Call
140G-K15K4-D30
This 4-pole molded-case circuit breaker features a type K frame and operates with 300 A of rated current. It supports rated insulation voltages of 1000 V and withstands impulse voltages up to 8 kV. We
Call
140G-K15K4-D40
This circuit breaker operates on an electronic LSIG and MM protection scheme and features four poles. It is rated for a current range of 400 A and withstands insulation voltages of up to 1000 volts. T
Call
140G-K15X3
This circuit breaker operates with a rated insulation voltage of 1000 Volts and withstands impulse voltages of up to 8 kV. The unit has a weight of 7.17 pounds and features a mechanical life rating of
Call
140G-K15X4
This four-pole circuit breaker operates under a rated insulation voltage of 1000 volts, providing strong electrical insulation. Additionally, it withstands impulse voltages as high as 8 kV, which offe
Call
140G-K3F3-D30
The 140G-K3F3-D30 Molded Case Circuit Breaker has a Adjust Thermal/ Adjust Magnetic Protection Type and a 7.17 lb Weight.
Available
140G-K3F3-D40
The 140G-K3F3-D40 Molded Case Circuit Breaker has a Adjust Thermal/ Adjust Magnetic Protection Type and a 7.17 lb Weight.
In Stock Ships Tomorrow
140G-K3F4-D30
This circuit breaker features four poles and operates efficiently with a rated current of 300 A and a maximum current of 400 A. With a rated insulation voltage of 1000 volts and a rated impulse withst
Call
Showing 981-990 of
1,219
results
About 140G MCB
The Allen-Bradley 140G MCB series is a series of molded case circuit breakers whose usable value can be linked to absolutely all branches of industry, and they can also be implemented in buildings and homes. The 140G circuit breakers are 3-pole or 4-pole protective devices that are available with continuous current ratings between 125 and 3000 Amps. Their maximum operating voltage is 690 Volts AC. For standard electrical installations, customers usually buy circuit breakers with fixed thermal and magnetic protection options, but 140G units are also available with the adjustable thermal/fixed magnetic combination protection feature as well as with the molded case switch (isolator) options. The 140G circuit breaker housing is made of a special plastic that is a good insulator and that is not susceptible to wear and tear due to exposure to high temperatures. The mechanical construction is designed to prevent the jamming of moving parts, thus giving the devices a high level of safety in operation. The lifespan of these molded case circuit breakers is estimated to be over 25,000 mechanical operations.
The Allen-Bradley 140G molded case circuit breakers respond with lightning speed to the appearance of short-circuits, and the force separating the contacts inside of these units is proportional to the current flowing through them, so the speed of contact separation increases with the increase of the short-circuit current to which the device needs to respond. Internal options that can be factory installed on the 140G series circuit breakers are shunt trip, undervoltage release, alarm contacts, and auxiliary contacts. All the products from this series can be reverse-fed, which simplifies the installations in some applications. Allen-Bradley has certified that the 140G series circuit breakers with all their accessories meet the CE, UL, CSA, IEC, and the CCC standards.