- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-A09NZ243
This unit operates with a DC coil using a rated voltage of 24V. It includes one auxiliary contact that is also normally open. The contactor supports DIN rail mounting for easy installation and has kW
In Stock Ships Today
100-A12ND3
This contactor is structured with three poles and offers a main configuration of three normally open (NO) contacts, along with one auxiliary normally open contact. The coil voltage required is either
In Stock Ships Today
100-A24NZ243
This Allen Bradley contactor adheres to the IEC 60947-4-1 standards and offers reliable performance across a temperature range of 0 to 70 degrees Celsius. It is rated for frequencies of 50/60 Hz and c
In Stock Ships Today
100-B180NA3
This contactor features a configuration with three poles and one normally open contact. It utilizes a coil voltage of 220-240 V AC, functioning at a frequency of 50/60 Hz. Designed for both open and p
In Stock Ships Today
100-B250NA3
Designed for motor control, this contactor includes a 3-pole configuration, providing three normally open contacts. It supports a rated voltage of 600 V and operates at 50/60 Hz, making it versatile f
In Stock Ships Today
100-B400NA3
This contactor operates at frequencies of 50 or 60 Hz and is rated for a maximum voltage of 600 V. The contact configuration consists of three normally open contacts (3 NO). The device does not includ
Available
100-B600NA3
This contactor features one normally open (NO) contact configuration and includes an auxiliary NO contact. It operates at a coil voltage of 220 to 240V AC and has a three-pole setup. Designed for moun
In Stock Ships Today
100-C09D*10
This motor starter contactor is rated for up to 25A and features three poles for extensive versatility. It accommodates different horsepower ratings, including 1/3 HP at 115V for single-phase applicat
Call
100-C09D01
This model has three poles and uses screw-type terminals for connections. It features a main current circuit resistance of 2.7 milliohms. The contactor can be mounted either on a base or a DIN rail an
In Stock Ships Tomorrow
100-C09D10
This Allen Bradley contactor is rated for a maximum of 400V in 3-phase systems and 690V in 1-phase configurations. Its standard coil voltage rating is 110/120 VAC, and it has 1 normally open auxiliary
In Stock Ships Today
Showing 1-10 of
720
results