- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-C09KJ10
This contactor supports AC coil control and is compliant with IEC, UL, and CSA standards. It uses screw terminals for secure connections and has a line-side coil termination. The module operates effec
In Stock Ships Today
100-C09KL200
Designed to support significant loads, this contactor has an AC-3 current rating of 9.0 Amps and an AC-1 current rating of 32.0 Amps. The coil operates at a voltage range of 200 to 230 Volts AC and is
Available
100-C09KY200
This IEC contactor is constructed with four poles and is capable of handling up to 9.0 A of operational current. It includes both normally open and normally closed contacts, along with a coil voltage
Available
100-C09L10
With a coil voltage range of 200 to 220V AC at 50 Hz and 208 to 240V AC at 60 Hz, this contactor offers flexible voltage compatibility. It consists of a total of three poles, with three normally open
In Stock Ships Tomorrow
100-C09QJ10
This contactor features a configuration of three normally open poles and an auxiliary contact that includes one normally open contact. It supports a contact voltage of up to 690 Volts AC and is design
In Stock Ships Today
100-C09T10
This contactor operates with a rated current of 9 A and is suitable for environments with insulation requirements up to 690 V. It can manage voltages reaching a maximum of 690 VAC, supporting diverse
Call
100-C09ZA10
The 100-C09ZA10 contactor operates at a coil voltage of 220 VDC and is suitable for three-phase DC applications. This device conforms to IEC standards and can be conveniently mounted on a DIN rail or
Call
100-C09ZJ01
Part of the IEC 100 Contactors series, the 100-C09ZJ01 is equipped with three poles and provides a power rating of 4 kW at 400 V. Terminal connections are made via screw terminals, and it supports a r
In Stock Ships Tomorrow
100-C09ZJ10
This Allen Bradley IEC 100 contactor is rated for an AC-3 current of 9 Amps and supports up to 32 Amps for AC-1 applications. It features three poles and includes one normally open auxiliary contact.
In Stock Ships Today
100-C09ZJ400
This contactor consists of four normally open contacts (4 NO) and is equipped for both DIN rail and base mounting. Its coil is exclusively DC powered with a termination located on the line side. Certi
In Stock Ships Today
Showing 21-30 of
783
results