- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-C30K00
This contactor encompasses three poles and is configured with three normally open (N.O.) contacts. Rated for a coil voltage of 24 V AC at a frequency of 50 Hz, it mounts easily on DIN rails or panels.
In Stock Ships Tomorrow
100-C30KD00
This contactor functions efficiently within a voltage range of 690 V AC and is rated for 18 A under AC-3 conditions. It supports power levels of 15 kW at 690 V and can also be used at 5.5 kW for AC-4
In Stock Ships Today
100-C30KF00
With a rated operational current of 30 A at 415V and 60°C in AC-3 duty, this contactor also handles up to 65 A in AC-1 at 415V and 40°C. Its coil operates at 230V AC, and it features a broad frequency
In Stock Ships Today
100-C30KJ01
This contactor features three poles and a contact configuration consisting of zero normally open (NO) contacts and one normally closed (NC) contact. It provides an auxiliary NC contact for additional
Available
100-C30KL00
This IEC contactor features screw terminals and operates at line frequencies between 50 and 60 Hertz. It has no normally open or normally closed contacts. The contactor is rated for a maximum impulse
Available
100-C30KL01
This IEC contactor supports operational current ratings of 30 A on AC-3 and 65 A on AC-1 at 40 °C. It features a line-side coil terminal and includes one normally closed (N.C.) auxiliary contact. At 2
Available
100-C30T01
Engineered to handle robust electrical loads, this device includes built-in auxiliary contacts with a configuration of 0 normally open and 1 normally closed. It also boasts an HP rating of 10 at 230 V
Available
100-C30T10
For its contact ratings, the 100-C30T10 supports an operational current of 30 A under AC-3 conditions at 400V/415V. Under AC-1 conditions at 400V and 40°C, it handles up to 45 A. This contactor facili
In Stock Ships Today
100-C30UD10
This contactor is rated up to 690 V and allows for operational frequencies between 50 Hz and 60 Hz. It provides a power output of 15 kW at 400 V under AC-3 ratings, ensuring compatibility with various
Available
100-C30UDJ00
This contactor features three poles for enhanced circuit management and operates at a maximum voltage of 690V AC. The coil configuration is electronic, ensuring efficient control. It is suitable for m
Available
Showing 91-100 of
783
results