- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-C37A10
Designed for operational efficiency, the 100-C37A10 contactor caters to multiple applications, including motor loads. It possesses a contact configuration of 1 normally open (NO) and zero normally clo
Available
100-C37B10
This contactor is rated for 25 horsepower and is compatible with 3-phase power systems. It operates within a frequency range of 50 to 60 Hz. The coil termination is designed for line-side connections,
Call
100-C37D00
This contactor includes three poles, allowing for reliable switching without any normally open or normally closed configurations. The device adheres to IEC standards and operates across a frequency ra
In Stock Ships Today
100-C37D01
This IEC 100 contactor features three poles and includes one normally closed auxiliary contact. It supports motor loads up to 25 hp at 460V and 10 hp at 230V. The contactor is suitable for frequencies
In Stock Ships Today
100-C37D10
This contactor is part of the IEC 100 series and includes a contact configuration of one normally open and no normally closed contacts. It supports a frequency range of 50/60 Hz, with three poles avai
In Stock Ships Today
100-C37EJ00
This contactor features a three-pole configuration with 3 normally open contact arrangements. It is rated for 37 A at a maximum voltage of 690 V. It includes a line-side coil termination and supports
In Stock Ships Today
100-C37EJ10
The 100-C37EJ10 contactor boasts a rated operating current of 65A at AC-1 on a 415V supply at 40 degrees Celsius. In AC-3 ratings, it manages 37A at 415V with a maximum kilowatt capacity of 18.5 kW at
In Stock Ships Today
100-C37KY00
This IEC contactor features a configuration of three normally open (N.O) contacts and no normally closed (NC) contacts. It supports a rated power of 100 horsepower and operates at frequencies between
Call
100-C37L00
Rated for 10 horsepower, this 3-pole contactor operates within a coil voltage range of 200 to 220 V at a frequency between 50 to 60 Hz. The design does not include auxiliary contacts, and it accommoda
Available
100-C40UBP
This contactor features a frequency rating of 50 Hertz and is equipped with three normally open (N.O.) poles. It does not come with auxiliary contacts and allows for 35 mm DIN rail or panel mounting.
Call
Showing 71-80 of
720
results