- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Photoswitch Repair
We offer extensive repairs for your Photoswitch. We keep many spare parts in stock so that we can repair your Photoswitch as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your Photoswitch parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse Photoswitch Repairs
Browse our catalog of repairable Photoswitch parts to get a quote.
13DJ3-3000
This module incorporates conductive sensing capabilities with a resistivity detection limit of 60 megohm·cm and utilizes a DPDT electromagnetic relay for output. With low probe voltage operation, it c
Call
22ZC-221
Designed for seamless integration, this basic zone controller supports both 2-wire and 3-wire NPN sinking inputs at 24V DC. It has a response time of up to 1 ms and provides an output rating of 100 mA
In Stock Ships Today
23DF3-3000
The 23DF3-3000 module is an impulse control module designed and manufactured by Allen-Bradley/Rockwell Automation. This Series B PHOTOSWITCH module has a side view feature and it is completely modular
In Stock Ships Today
23DF3-3001
The product code 23DF3-3001 is used for a Photoswitch module made by Allen-Bradley/Rockwell Automation. The module includes features like scanner control, side viewing, a fast response time, reliabili
In Stock Ships Today
42CA-E1EZB1-D4
The 42CA-E1EZB1-D4 model is a cylindrical photoelectric sensor that operates efficiently with a sensing range extending up to 16 meters. This device uses a transmitted beam sensing mode and features a
Call
42CM-B2LNBE-A2
This sensor utilizes NPN output with a rapid response time of 0.5 milliseconds. It operates using an infrared LED light source emitting at a wavelength of 660 nm. The sensor's housing is constructed o
In Stock Ships Today
42CRC-4000
The Allen-Bradley 42CRC-4000 color registration controller has a voltage range of 10 to 30 Volts DC. It is a Photoswitch controller and it has a current consumption rating of 70 milliamps maximum.
In Stock Ships Today
42CRC-4001
This control photoelectric sensor operates at voltages between 10 and 30 VDC and consumes 70 mA of current. It has a capacity of 100 mA for output loads and a sensing distance of 12.7 mm. The IP67-rat
Available
42DCB-5000
This photoelectric sensor features a blue line designation and is built to provide analog output while maintaining compliance with CE and UL standards. The unit demonstrates robustness against ambient
In Stock Ships Today
42DRA-5000-FO
This photoelectric sensor features both analog voltage and current outputs. The voltage output can be adjusted from 1 to 10V DC, while the current output ranges from 1 to 20 mA. With a quick response
In Stock Ships Today
Showing 1-10 of
106
results