W250M1CNC
This equipment is classified as a size 1C NEMA motor starter and contains three poles. It supports trip class selections of 10, 20, or 30. With horsepower ratings of 7.5 Hp at 230V and 10 Hp at both 4
Call
Free UPS Ground on All Orders!
+1 (919) 205-4392
Eaton Cutler-Hammer W200 Drives Repair
We offer extensive repairs for your W200 Drives. We keep many spare parts in stock so that we can repair your W200 Drives as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your W200 Drives and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Browse W200 Drives Repairs
Browse our catalog of repairable W200 Drives parts to get a quote.
W250M2CFC
Designed for 3-phase operation, this NEMA Size 2 starter supports a coil voltage of 230 VAC. It is rated for horsepower capacities of up to 10 Hp at 200 VAC, 15 Hp at 230 VAC, and 25 Hp at 460V/575 VA
Call
W250M2CNC
This NEMA contactor has continuous current handling of 45 Amperes, making it suitable for higher-demand applications. It operates with motor voltages of 200, 230, 460, and 575 V, enabling it to handle
Call
W250M3CFC
Supporting voltages of 200, 230, 460, and 575 V, the W250M3CFC can manage different horsepower capacities: 25 Hp at 200 V, 30 Hp at 230 V, and 50 Hp at 460 V. This NEMA starter is built for installati
Call
W250M3CNC
This motor starter functions with three poles and is classified as a reversing starter. It operates in a vertical orientation and comes in a size 3 frame. Capable of handling separate control wiring,
Call
W250M4CFC
This vacuum starter can handle a rated voltage of 600 VAC with a coil voltage of 120 VAC. It operates efficiently in a three-phase system and has a full load current range spanning from 9.9 Amps to 13
Call
W250M4CNC
This NEMA contactor features three poles and operates efficiently at a frequency of 50 Hz. Its design supports temperature ranges from 0°C to 40°C for operation and -30°C to 70°C for storage. It is co
Call
W250M5CFC
This vacuum starter is NEMA size 4 rated and operates effectively at rated voltages of up to 600 VAC. With a coil voltage requirement of 110 to 120 V AC, this unit is suitable for various power system
Call
W250M5CNC
Operating with three poles, the W250M5CNC is rated for ample horsepower, including 75 Hp at 200 V, 100 Hp at 230 V, and 200 Hp at both 460 V and 575 V. The unit requires a coil voltage between 110 to
Call
W250M6CFC
This vertical motor starter operates on three-phase power and has a total of three poles. The control voltage required for operation is 120 VAC, supporting a frequency of 60 Hz. It accommodates a vari
Call
Showing 31-40 of
43
results
About W200 Drives
Eaton Cutler-Hammer W200 non-reversing magnetic servo motor starters are full-voltage servo motor starters that are made for supplying and interrupting power to the motors due to the command signals or for interrupting motor power due to the activation of some of the protective functions. The states recognized by W200 servo motor starters as a danger to the motors are ground currents, phase losses, phase imbalances, or significant overloads. In all the above cases, the W200 servo motor starters will cut off the power to the motors and the LED that indicates the “trip” position will light up. These devices cannot be restarted until a reset procedure is performed, and this can be done manually (push the reset button on the starter housing) or remotely. At the bottom of the W200 starters are a DIP switch that is used to select the device’s reset mode, overload class, and the overload limit current. Based on the setting on the DIP switch, the starters can be calibrated to detect currents in the range of 12.4 to 111 Amps.
The Eaton W200 servo motor starters can be size 3 or size 4 and these sizes can cover 25 to 100 Horsepower (20 to 75 kilowatts) rated 3-phase motors. The main part of the W200 servo motor starters is the circuit board holding microprocessor that is programmable and responsible for all the devices’ protective features. Two communication devices known as WPONI and WPONIDNA devices can be added to the basic version of the W200 servo motor starters. The WPONI device is used for remote control and it allows the microprocessor to send data at 9600 baud rate via the INCOM network. The WPONIDNA adapter allows for device control via the DeviceNet network at a 125,000 baud rate.