W210M3CNC
This NEMA contactor operates efficiently within a motor voltage of 230 volts and has a maximum horsepower capacity of 30 Hp. The continuous current rating is set at 90 A, while the coil voltage operat
Call
Free UPS Ground on All Orders!
+1 (919) 205-4392
Eaton Cutler-Hammer W200 Drives Repair
We offer extensive repairs for your W200 Drives. We keep many spare parts in stock so that we can repair your W200 Drives as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your W200 Drives and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Browse W200 Drives Repairs
Browse our catalog of repairable W200 Drives parts to get a quote.
W210M4CFC
This product features an open enclosure type and is configured with three poles. It operates with an AC coil voltage of 120 VAC at 60 Hz. The solid-state overload relay allows for adjustable trip sett
Call
W210M4CNC
This NEMA size 4 contactor can handle up to 40 horsepower at 200 volts, 50 horsepower at 230 volts, and 100 horsepower at both 460 and 575 volts. It is rated for continuous currents up to 135 Amps and
Call
W210M5CFC
This non-reversing starter is sized as NEMA Size 5, providing a horsepower rating of 75 at 200 V, climbing to 100 at 230 V. It holds a consistent rating of 200 HP when powered at either 460 V or 575 V
Call
W210M5CNC
This product features three poles and can function at frequencies between 50 Hz and 60 Hz. It supports a range of horsepower ratings including 75, 100, and 200 HP. The W210M5CNC is rated for motor vol
Call
W210M6CFC
This starter supports a continuous current of up to 540 A and can handle motors rated for 150, 200, or 400 horsepower. It accommodates multiple motor voltage ratings of 200, 230, 460, and 575 V, makin
Call
W210M6CNC
This NEMA contactor comes with a three-pole configuration and is designed for a motor voltage of 230 volts. Its operational temperature ranges from 0°C to 40°C, and it can be stored within -30°C to 70
Call
W210MLCFC
This motor controller is designed for reversing applications and supports horizontal mounting orientations. It features functionality for soft starting, speed control, and torque control. The device i
Available
W210MLCNC
With a continuous current rating of 27 A, this contactor can handle significant loads. It supports a maximum horsepower of 1 Hp at both 200 V and 230 V, and 2 Hp at both 460 V and 575 V. This product
Call
W250M1CFC
Designed for use with NEMA Size 1 ratings, this motor starter operates on a coil voltage of 120 Volts AC. It is rated for a motor voltage of 200 Volts AC, with a maximum horsepower capacity of 7.5 (5.
Call
Showing 21-30 of
43
results
About W200 Drives
Eaton Cutler-Hammer W200 non-reversing magnetic servo motor starters are full-voltage servo motor starters that are made for supplying and interrupting power to the motors due to the command signals or for interrupting motor power due to the activation of some of the protective functions. The states recognized by W200 servo motor starters as a danger to the motors are ground currents, phase losses, phase imbalances, or significant overloads. In all the above cases, the W200 servo motor starters will cut off the power to the motors and the LED that indicates the “trip” position will light up. These devices cannot be restarted until a reset procedure is performed, and this can be done manually (push the reset button on the starter housing) or remotely. At the bottom of the W200 starters are a DIP switch that is used to select the device’s reset mode, overload class, and the overload limit current. Based on the setting on the DIP switch, the starters can be calibrated to detect currents in the range of 12.4 to 111 Amps.
The Eaton W200 servo motor starters can be size 3 or size 4 and these sizes can cover 25 to 100 Horsepower (20 to 75 kilowatts) rated 3-phase motors. The main part of the W200 servo motor starters is the circuit board holding microprocessor that is programmable and responsible for all the devices’ protective features. Two communication devices known as WPONI and WPONIDNA devices can be added to the basic version of the W200 servo motor starters. The WPONI device is used for remote control and it allows the microprocessor to send data at 9600 baud rate via the INCOM network. The WPONIDNA adapter allows for device control via the DeviceNet network at a 125,000 baud rate.