Free UPS Ground on All Orders!
+1 (919) 205-4392
Eaton Cutler-Hammer Panelmate ePro Repair

Eaton Cutler-Hammer Panelmate ePro Repair

We offer extensive repairs for your Panelmate ePro. We keep many spare parts in stock so that we can repair your Panelmate ePro as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your Panelmate ePro and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!

  • 2 Year DO Supply Warranty
  • Fast repairs at low costs
  • No surprises or up-charges for difficult repairs
  • Standard lead time of 2-4 weeks
  • Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more

Browse Panelmate ePro Repairs

Browse our catalog of repairable Panelmate ePro parts to get a quote.

7475T-6

The 7475T-6 Operator Interface is a PanelMate ePro ES series industrial operator interface from Eaton Cutler-Hammer. It has a 5.7-inch, color STN, ¼ VGA display screen with a 24 Volts DC voltage ratin

Call

7500XE

The 7500XE Operator Interface is an industrial control system that belongs to the Eaton Cutler-Hammer PanelMate ePro family of products. It comes with 24 Volts DC of power input and 22 Watts of power

Call

7585DT-12

The 7585DT-12 Operator Interface is a PanelMate ePro flat panel display manufactured by Eaton Cutler-Hammer. It comes with 100 to 240 Volts AC voltage, and a 12.1-inch color TFT screen. It weighs 12 p

Call

7585DT-17

The 7585DT-17 Operator Interface is an industrial control interface that belongs to the PanelMate ePro series of operator interfaces. It has a 17-inch color TFT screen, 100 to 240 Volts AC voltage, an

Call

7585K-10

The 7585K-10 Operator Interface Terminal is a PanelMate ePro automation interface made by Eaton Cutler-Hammer. It has a 10.4-inch color TFT display with full VGA resolution, 24 Volts DC of power input

Call

7585SK-10

The 7585SK-10 Operator Interface Terminal is a PanelMate ePro series industrial control system designed by Eaton Cutler-Hammer. It has a 10.4-inch TFT color touchscreen, a 24 Volts DC voltage rating,

Call

7585SK-10XE

The 7585SK-10XE Operator Interface Terminal is an easy-to-use industrial automation interface from Eaton Cutler-Hammer. This 10.4-inch TFT color display module has 1.6 Amps of current and 24 Volts DC

In Stock Ships Today

7585T-10

The 7585T-10 operator interface terminal belongs to the PanelMate ePro family which is designed by Eaton Cutler-Hammer. It features a 10.4-inch TFT color display, 24 Volts DC of input power, and 16 Am

Call

7585T-10X1-epro

The 7585T-10X1-epro terminal is a PanelMate ePro human-machine interface by Eaton Cutler-Hammer. It has a 10.4-inch LCD touchscreen.

Call
Showing 1-10 of 41 results

About Panelmate ePro

The Panelmate ePro series is a series that provides different kinds of operator interface terminals to the control industry. This series is launched by Cutler-Hammer, a division of Eaton Corporation, and its main purpose is to offer fast and accurate terminal solutions for automation applications. All the terminals from this series are high-performance and they come with different touchscreen sizes that vary from 8 to 15 inches. These touchscreens also work as operator entry tools. The Cutler-Hammer Panelmate ePro terminals have been designed with industrial-grade materials that enable them to be used in outdoor environments and harsh conditions. Unlike most of the operator interfaces in the industry, these interfaces can operate in direct sunlight since ultraviolet rays do not affect them.

All the units from the Eaton Cutler-Hammer Panelmate ePro terminals require a power supply of 1.6 Amps and 24 Volts, and at the same time, they operate with a voltage of 24 Volts DC and a tolerance of -15 to  20%. Another important fact to consider is that the terminals’ connectivity can be performed through an Ethernet connection by using static IP addresses, Ethernet workgroup domains, and through direct USB connections. Some of the applications where the Cutler-Hammer Panelmate ePro series terminals are eligible for use are discrete diagnostic and control, water and wastewater control panels, and automotive press and control machine applications. These terminals can withstand vibrations of 10 to 18 Hertz, shocks of 1 G, a level of humidity of up to 95%, and operating temperature ranges of 0 to 50 degrees Celsius.