GE Fanuc Emerson
IC694MDL260
The GE Fanic IC694MDL260 module is a 32-point enabled input module. It runs with 120 Volts.
From $538
In Stock Ships TodayGE Fanuc Emerson
Free UPS Ground on All Parcel Orders!
+1 (919) 205-4392
Search Results
1994 results
1,994 results
Learn more
Products
- GE Fanuc Emerson
IC693CMM302
The IC693CMM302 enhanced Genius communications module from GE Fanuc's Series 90-30 product line can communicate with a Series 90-30 PLC and as many as 31 additional devices on its bus at a time. This module can also support data monitoring, peer-to-peer communication, and master-slave communication.
From $357In Stock Ships Today - GE Fanuc Emerson
IC660BSM021
The GE Fanuc IC660BSM021 Genius I/O Bus Switching Module (BSM) is for the Genius I/O Bus System. This module has 2 serial connectors and 24/48 Volts DC operating voltage, and it can accommodate up to 8 I/O blocks on the same dual serial bus.
From $176Available - GE Fanuc Emerson
IC693CPU341
The IC693CPU341 module is a CPU module with 20 Megahertz of rated speed. The IC693CPU341 module is compatible with the GE Fanuc Series 90-30 PLCs.
From $849In Stock Ships Today - GE Fanuc Emerson
IC200BEM003
The IC200BEM003 module is a master module manufactured by GE Fanuc that can send and receive data on the PROFIBUS network. It is compatible with the Versamax, PROFINET, and CPU 005 systems.
From $700In Stock Ships Today - GE Fanuc Emerson
IC697MDL940
The IC697MDL940 output relay module is designed by GE Fanuc and it belongs to Series 90-70 of the GE PLC devices. This module has a frequency of 47 to 63 Hertz and a rated voltage of 120 to 240 Volts AC or 5, 24, or 125 Volts DC. The module has 16 available outputs and it has an output leakage curre
From $326In Stock Ships Today - GE Fanuc Emerson
IC200UEX626
This expansion module offers six I/O points, split into four inputs and two outputs. It operates with a 24 V DC power supply and has a voltage range of 19.2 to 30 V DC. The IC200UEX626 can be mounted on a DIN rail and installed as far as 2 meters from the micro PLC for flexible setups. The module re
From $376In Stock Ships Today - GE Fanuc Emerson
IC694APU300
As part of its functionalities, the IC694APU300 includes 12 single-ended or 6 differential positive logic inputs. The input voltage can range from 5 V DC to 30 V DC, depending on the TSEL configuration. It provides four positive logic outputs that can effectively drive up to 1.5 A loads, alongside a
From $735In Stock Ships Today - GE Fanuc Emerson
IC693ACC303
The IC693ACC303 memory card is an EEPROM card intended for use with micro PLC handheld programmers from Series 90-30 by GE Fanuc. The memory card module supports models 340, 341, and 351 and it has a storage capacity of 32 KB. The card has a write protection option and it features transfer time of 1
From $384Available - GE Fanuc Emerson
IC693NIU004
The GE Fanuc IC693NIU004 Ethernet Network Interface is an easy-to-install, solid-state network interface card (NIC) specifically designed and manufactured by Fanuc for providing Ethernet access to the Series 90-30 PLCs. It comes from the factory with 2 ports to establish connections to the industria
From $5,750In Stock Ships Today - GE Fanuc Emerson
IC694PSK001
The GE Fanuc IC694PSK001 Power Sync and Measurement Kit is made for the RX3i PacSystems series. This system consists of a PSM module, a terminal assembly, and a terminal interface cable.
From $6,600In Stock Ships Today - GE Fanuc Emerson
IC698CPE010
The GE Fanuc IC698CPE010 CPU is made for the Rx7i PACsystem series. This 300 MegaHertz Intel Celeron CPU supports a wide range I/O devices, including the Series 90-70 discrete and analog I/O, communication modules, Series 90-supported VME modules, and a wide range of HMI devices.
From $3,573In Stock Ships Today
