7333 results
This overload relay is classified as Class 10 and requires manual resetting after an overload condition. It is designed to be mounted on DIN rails and meets IP 20 standards, ensuring adequate protection against foreign bodies. The product operates effectively in ambient temperatures ranging from -20
The Allen Bradley 1326AS-B310H-21 Servo Motor has an IEC Metric Flange with Keyway and a 2.1 Nm System Peak Stall Torque.
Designed for versatility, this servo motor features an impressive continuous stall torque of 10.2 N·m and can achieve a peak stall torque of 27.1 N·m. Rated at 460 VAC, the motor has a frame size of 130 mm and is equipped with four magnet stacks. Its protection level is rated IP65/IP67, suitable for
This push button is equipped with a 30 mm button size and offers a normally open and a normally closed contact configuration. Constructed from durable plastic, it is designed to withstand extensive use with an electrical design life of up to 1,000,000 cycles at maximum load. Additionally, it has a m
The Allen Bradley 1494V-FS200 fuse block is a fuse block that has been designed as an accessory to use with the 1494 series switches, especially the 1494V series switchs. This fuse block has been manufactured and designed by Allen Bradley/Rockwell Automation.
The Allen Bradley 802T-BT Electromechanical Limit Switch is a special type of motion detection and limit switch that is activated when the object or surface being monitored makes physical contact with a pushbutton assembly located on top of the switch. When the object or surface is not touching the
The Allen Bradley 1326AB-A2E-11 Servo Motor has an Inch Combination Face/Flange with Keyway and a 10.84 Nm System Peak Stall Torque.
**The 100S-C60DJ14C safety contactor by Allen Bradley/Rockwell Automation operates on a voltage of 24 Volts DC and it has a current rating of 60 Amps. The unit has an integrated diode and auxiliary contacts which include 4 normally open and 4 normally closed contacts. The unit has a rated coil frequ
The VPL-B0631T-PJ14AA Low-inertia Servo Motor has 1 Magnet Stack, a Shaft Key Shaft , and a 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) Feedback.