Search Results

VPL-B0631T-PJ14AA

Allen Bradley / Motors / VPL Servo Motors

The VPL-B0631T-PJ14AA Low-inertia Servo Motor has 1 Magnet Stack, a Shaft Key Shaft , and a 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) Feedback.

842A-31GB

Allen Bradley / Motors / 842 Encoders

Featuring a total bit resolution of 24 bits, the 842A-31GB encoder achieves a total resolution of 4096 revolutions. With a 10 mm shaft diameter and a 36 mm pilot diameter, it is compatible with servo mounts. The encoder communicates via an SSI interface with differential signaling and utilizes Gray

802T-K1T

Allen Bradley / Motors / 802T Limit Switches

The 802T-K1T switch is a limit switch. It belongs to the Bulletin 802T limit switches series from Allen Bradley.

MPM-B1153F-MJ74AA

Allen Bradley / Motors / MPM Servo Motors

The Allen Bradley MPM-B1153F-MJ74AA has a 115 mm Frame Size and a IP65/IP67 Enclosure.

MPL-A320P-HK22AA

Allen Bradley / Motors / MPL Servo Motors

849A-ZOB25

Allen Bradley / Motors / 849 Timing Relays

This timing relay operates at frequencies between 50 and 60 Hz and conforms to NEMA A600 contact ratings. It includes one Normally Open (N.O.) contact and one Normally Closed (N.C.) contact for flexibility in signal management. The relay has a 0.4 A DC rating at 115–125V and a 0.2 A DC rating at 230

2090-XXLF-375B

Allen Bradley / Motors / 2090 Cables

The 2090-XXLF-375B filter is an Allen Bradley universal AC line filter. The AC line filter features a power voltage of 500 Volts AC.

104-C85D22

Allen Bradley / Motors / 104 IEC Safety Contactors

The Allen Bradley 104-C85D22 Reversing Contactor is a motor controller or motor starter designed and manufactured with ease of installation in mind. It comes as a pre-assembled set of 2 contactors, 1 for controlling the forward starting of the motor and the other for controlling the reverse starting

MPL-B230P-MJ74AA

Allen Bradley / Motors / MPL Servo Motors

2090-UXBB-DM15

Allen Bradley / Motors / 2090 Cables

This breakout board has a maximum cable diameter of 11.4 mm (0.45 in.) and accommodates wire sizes from 30 to 16 AWG for the screw terminals. It is intended for use in drives that support motor feedback functionality. When mounting this component, a torque of 0.40 Nm is recommended for the screws, w