Search Results
61437 results
MVI56E-MNET
Allen Bradley / PLCs / ControlLogix
This interface module is compatible with Modbus TCP/IP and supports Ethernet connections. The backplane current rating is 800 mA at 5V DC and 3 mA at 24V DC. An LED display provides a 4-character scrolling readout, while the device handles operating shocks up to 30 G and non-operating shocks up to 5
1756-OF4
Allen Bradley / PLCs / ControlLogix
This output module features four independent outputs designed to operate within a voltage range of -10 to 10 volts, or a current range of 4 to 20 mA. The backplane power ratings are 5.1V DC at a maximum of 150 mA or 24V DC at 210 mA maximum. This device has a thermal dissipation rate of 10.91 BTU pe
25B-D030N104
Allen Bradley / Drives / PowerFlex 525
This model provides 30 amps of output current and has a total power loss rating of 387 watts. The drive is classified as Size D and features control options that include volts per Hertz, sensorless vector, and closed-loop velocity vector control. Additionally, it supports permanent magnet motor cont
1762-IR4
Allen Bradley / PLCs / MicroLogix 1200
This input module supports a maximum of four resistance input connections and operates with an impressive input impedance exceeding 10 Megaohms. The 1762-IR4 reliably offers channel-to-channel isolation of -/+ 10V DC and can be installed up to six modules away from the controller, maintaining a stab
SLC505
Allen Bradley / PLCs / SLC 500
The Allen-Bradley SLC 505 is a SLC 500 SLC 505 Processor. This SLC 505 Processor has the following part numbers: 1747-L551, L552, or L553. These processors have 4096 Inputs and 4096 Outputs.
1762-OW8
Allen Bradley / PLCs / MicroLogix 1200
This module supports a voltage range of 5-265V AC and 5-125V DC, utilizing normally-open relays for effective switching. It includes a terminal block, DIN rail latch, and panel mounting tabs for convenient installation. The maximum heat dissipation is 2.9 watts, with signal delays reaching up to 10
1756-IF8I
Allen Bradley / PLCs / ControlLogix
This input module supports voltage and current modes, allowing for various configurations of its eight input channels. With voltage input options ranging from -10 to 10 volts, 0 to 10 volts, and 0 to 5 volts, it also accommodates an input current range of 0 to 20 mA. The module utilizes the Sigma-De
1794-OE12
Allen Bradley / PLCs / Flex I/O 1794
Designed to work within a continuous isolation voltage of 50 volts, the 1794-OE12 module draws a FLEXbus current of 80 mA. Its maximum power dissipation is rated at 7.68 watts when operating at 24V DC, producing a thermal dissipation of 26.2 BTU per hour under the same conditions. The output module
1734-VHSC24
Allen Bradley / PLCs / Point I/O 1734
This counter module operates with an input current of 6.1 mA at 15V DC and 10.2 mA at 24V DC. It maintains an input off-state voltage limitation of 1.8V DC and an ON-state current of 5 mA at a voltage of 12.5V DC. The maximum power dissipation while under rated load is rated at 1.9 watts.
2094-BC07-M05-S
Allen Bradley / Drives / Kinetix 6000
This Integrated Axis Module operates at a nominal input voltage of 380 to 480 volts AC (3-phase) with a frequency requirement of 47 to 63 Hz. The module manages input voltage ranging from 324 to 528 volts AC (RMS, 3-phase) and can handle a DC input for the common bus of 458 to 747 volts DC with a cu