Search Results
1940 results
IC693PBS201
GE Fanuc Emerson / Series 90-30
The GE Fanuc IC693PBS201 Profibus DP Slave Module Card is used for adding a secondary PLC to a PROFIBUS DP network that will serve as a slave processor. It allows this slave PLC to communicate with the master PLC on request, through the PROFIBUS DP network, in order to exchange data such as variable
IC660BCM501
GE Fanuc Emerson / Genius I-O
Designed to ensure efficient operation, the battery charger has a minimum charging time of 15 minutes and can take up to 6 hours for a fully charged state. This unit also features a voltage selection switch for flexibility with power sources.
IC660BLM506
GE Fanuc Emerson / Genius I-O
The IC660BLM506 plug is a terminating plug with a 150-Ohm resistance rating. This device is installed in the Serial 1 and Serial 2 terminals for bus termination on the Genius I-O blocks.
IC695CEP001
GE Fanuc Emerson / RX3i PacSystem
The IC695CEP001 CEP carrier component is manufactured by GE Fanuc and it is made for a voltage range of 19.2 to 30 Volts DC and it has a power rating of 5.25 Watts (0.22 Amps) at 24 Volts DC. This PROFINET CEP carrier has 2 Ethernet RJ-45 ports and a Micro-B USB port for firmware.
IC630CCM311
GE Fanuc Emerson / Series Three
This I/O link remote module operates within a temperature range of 0 to 60 degrees Celsius and can be stored safely between 0 and 70 degrees Celsius. With a backplane power requirement of 100 mA at 5 VDC, this module has a compact weight of approximately 0.73 kgs. It is capable of handling 256 I/O w
IC610MDL125
GE Fanuc Emerson / Series One
The IC610MDL125 is a robust input module within the Series One by GE Fanuc Emerson, designed to manage 8 input points and designed for standard operating voltages between 97 and 132 Volts AC. This component is compatible with frequencies ranging from 47 to 63 Hertz, making it versatile across variou
IC610MDL176
GE Fanuc Emerson / Series One
This output module is designed to operate within a specified voltage range of 97-265V AC and can handle an AC frequency of 47 to 63 Hertz. It supports a maximum current of 2 Amps and can manage an inrush current of 20 Amps for brief periods of 16 ms. Optimal performance is ensured with an internal p
IC755CBS15CDA
GE Fanuc Emerson / Quickpanel
The GE Fanuc IC755CBS15CDA terminal is a Quickpanel+ series operator terminal. The IC755CBS15CDA terminal is based on an ARM Cortex A8 processor.
IC695ECM850
GE Fanuc Emerson / RX3i PacSystem
The IC695ECM850 module is a GE Fanuc Ethernet communication module. The IC695ECM850 module enables interfacing between the RX3i systems and the IEC 61850 networks.
IC697ACC744
GE Fanuc Emerson / Series 90-70
The IC697ACC744 Rack Fan Assembly is a rack cooling fan manufactured by GE Fanuc. It comes with 3 fans, 24 Volts DC of operating voltage, and 6.7 Watts of input power. It weighs 5.94 pounds.