Search Results
1924 results
IC687BEM744
GE Fanuc Emerson / Rx7i PACsystem
The GE Fanuc Automation IC687BEM744 FIP Bus controller can operate with up to 128 devices. It has a serial port connector and 2 FIP bus connectors. It can be set up through the CIMPLICITY Control 90 software.
IC693ACC323
GE Fanuc Emerson / Series 90-30
The GE Fanuc IC693ACC323 module is a power supply module with a minimum holdup time of 20 milliseconds. The power supply module comes with a nominal rated voltage of 120 to 240 Volts AC or 125 Volts DC.
EP-1218
GE Fanuc Emerson / PACSystems RSTi-EP
This digital input module supports a supply voltage of 24VDC, with an operational range of 20.4 to 28.8 VDC. It operates effectively across a temperature range of -4 to 140 degrees Fahrenheit and can withstand storage temperatures as low as -40 degrees Fahrenheit and up to 185 degrees Fahrenheit. Th
IC630MDL325
GE Fanuc Emerson / Series 90-30
This input module features 16 points divided into two groups. It operates with a current range of 7.5 to 14.1 mA for AC voltage and 2.2 to 4.2 mA for DC voltage. Off-stage voltages are less than 20V for AC and below 30V for DC, with on-stage delays of 10 to 40 ms and 6 to 30 ms respectively. The mod
IC610PER154
GE Fanuc Emerson / Series One
Designed to fit into Series One PLC systems, this PROM writer unit measures 6.0" x 5.0" x 2.0" and has a weight of approximately 0.85 lbs. It operates effectively in environments where the temperature ranges from 0 to 60 degrees Celsius. This unit includes non-volatile memory storage and supports lo
ST-2424
GE Fanuc Emerson / RSTi PacSystem
This output module accommodates four output points, each capable of providing up to 0.5 A at 24 V DC, with a response time of 0.3 milliseconds. The device operates with a current consumption of 45 mA at 5 V DC and supports installation on a 35mm DIN rail. Additionally, it features an I/O connector f
IC630MDL354
GE Fanuc Emerson / Series Three
This output module operates within a voltage range of 5 to 12 volts DC, divided into two groups of 16 outputs each. It utilizes a 40-pin connector for easy integration and supports a maximum switching capacity of 2 amps. Designed for a storage temperature range of 0 to 70 degrees Celsius, it functio
IC600BF910
GE Fanuc Emerson / Series Six
This isolated AC output module supports 6 outputs with a maximum inrush current of 20 amps for brief periods of up to 33 milliseconds. It operates with optically isolated TRIAC switching, ensuring high safety standards during system operation. The output update happens at every CPU I/O scan, with co
IC200UDD104
GE Fanuc Emerson / Versamax
This micro PLC operates at a power voltage of 24 volts DC, with the same voltage rating for both input and output. The output voltage can be configured for either 12 or 24 volts DC. The IC200UDD104 has a maximum capacity of 126 physical I/O points and features a serial port connector using an RJ-45
ST-5101
GE Fanuc Emerson / RSTi PacSystem
With a count rate of 1.5 MHz, the ST-5101 supports one 5V DC input and offers a 24V DC output ranging from 5V to 28.8V. The design includes a spring clamp terminal block connector for secure wiring. The module also has selectable input filters and consumes a maximum of 80 mA of power at 5V DC.