Search Results
1928 results
IC660TSD021
GE Fanuc Emerson / Genius I-O
This device manages sink-type inputs and features diagnostic capabilities, including no-load and failed switch detection. It operates efficiently within 5% to 95% humidity levels. Additionally, its LEDs provide status indications, and outputs are configurable for power-up defaults, pulse testing, or
ST-2424
GE Fanuc Emerson / RSTi PacSystem
This output module accommodates four output points, each capable of providing up to 0.5 A at 24 V DC, with a response time of 0.3 milliseconds. The device operates with a current consumption of 45 mA at 5 V DC and supports installation on a 35mm DIN rail. Additionally, it features an I/O connector f
IC200UDR120
GE Fanuc Emerson / Versamax
This PLC module operates with 24V DC input and can handle 8 relay outputs, rated at 2 Amps each. It supports a wide AC power voltage range of 100 to 240V AC and can output voltage between 5 to 30V DC or 5 to 250V AC. Additionally, it is equipped with LED indicators.
IC754VGF08CTD
GE Fanuc Emerson / Quickpanel
8 in. Color-TFT with RS232/RS485 using 12 - 30 VDC
IC694MDL732
GE Fanuc Emerson / RX3i PacSystem
The GE Fanuc Automation IC694MDL732 positive-logic output module comes with 8 outputs. It can be hot-swapped during installation or removal.
IC610MDL127
GE Fanuc Emerson / Series 90-30
This input module supports a voltage input of 230V AC and features channels for signal processing. It switches ON when the voltage exceeds 180V AC and OFF when it drops below 40V AC. The unit has a power consumption of 10 mA at 9V DC and weighs 140 grams, including circuit indicators located on the
IC660EBD100
GE Fanuc Emerson / Genius I-O
The GE Fanuc IC660EBD100 electronics assembly is manufactured by GE Fanuc Automation as part of the Genius I/O block series. It comes with a 93 to 132 Volts AC single-source operating voltage rating with an I/O off standby power rating of 8.5 Watts.
IC693CBL310
GE Fanuc Emerson / Series 90-30
The GE Fanuc IC693CBL310 I/O Interface Cable for the Series 90-30 32-point high-density I/O modules. It has a maximum cable length of 10 feet and a 224-pin connector.
IC660ELB906
GE Fanuc Emerson / Genius I-O
The IC660ELB906 PC Interface Module is Genius I/O IBM PCIM manufactured by GE Fanuc. It runs on 5 Volts DC voltage and 400 milliamps of current. It has an XT slot and an AT type board, and it weighs 3 pounds.
IC200MDL632
GE Fanuc Emerson / Versamax
The GE Fanuc Versamax IC200MDL632 16-point input module is logic module that supports positlive logic operation and negative logic operation. This module is powered by the backplane power in the host Versamax PLC system.