Search Results
1928 results
IC600BF943
GE Fanuc Emerson / Series Six
With four selectable output points, the IC600BF943 supports analog output configurations at a current range spanning from 4 to 20 mA. Its primary power requirement is 5V DC at 1.5A, with an option for regulated 23 to 42.4V. This module handles a maximum load capacitance of 750 pF and operates effect
IC754VBL06CTD
GE Fanuc Emerson / Quickpanel
6 in. Color with RS232/RS485 using 12 - 30 VDC
IC600YB911
GE Fanuc Emerson / Series Six
As part of the Series Six line, this PROFIBUS-DP master features a 32-bit architecture. The unit supports a considerable amount of I/O with 4096 discrete input and output points, alongside 2048 analog inputs and 512 outputs. Equipped with a built-in 9-pin D-sub (female) RS-485 port, the device allow
IC655MDL577
GE Fanuc Emerson / Series Five
Rated for voltages between 115 and 230 volts AC, the IC655MDL577 features a 38-point terminal block configuration with key positions A2 and B1. The module’s typical supply current is 580 mA, while the maximum supply current reaches 640 mA. This module is compatible with MC5 fast blow fuses; however,
IC600YR511
GE Fanuc Emerson / Series Six
This Series Six I/O rack supports a total of 11 slots, comprising 10 addressable slots and 1 non-addressable slot intended for an I/O receiver module. It operates within a voltage rating of 115-230V AC and can manage ambient temperatures between 0 and 60 degrees Celsius.
IC610MDL153
GE Fanuc Emerson / Series One
This output module provides four sink outputs, operating at a nominal voltage of 24 VDC. It supports a maximum current of 2 A and has a peak voltage rating of 45 VDC. Response times for switching between ON and OFF states are as quick as 0.1 ms. Additionally, the logic side includes a circuit indica
IC600YB901
GE Fanuc Emerson / Series Six
The IC600YB901 remote I/O driver module is compatible with GE Series Six PLC systems. It features indicators for LOCAL, LINK, REMOTE, and REMOTE PARITY, which provide operational visibility. This module can be configured for a standard block size of 120 inputs and outputs, or expanded to 248 inputs
IC693MDL390
GE Fanuc Emerson / Series 90-30
The GE Fanuc IC693MDL390 output module is manufactured by the GE Intelligent Platforms/GE Fanuc as part of Series 90-30. It has a current rating of 2 Amps and it operates on a voltage of 120 to 240 Volts.
IC200UAR028
GE Fanuc Emerson / Versamax
This power supply unit operates within an AC voltage range of 100 to 240 volts. It has a power supply rating of 16 VA, with the maximum input voltage reaching 132V RMS at 50/60 Hz. The output leakage current at 240 volts AC is 15 mA, and the minimum output load is set to 10 mA.
ST-4114
GE Fanuc Emerson / PACSystems RSTi-EP
As part of the PACSystems RSTi-EP series, this module offers isolated outputs with an output current range extending from 0 to 20 milliamps. The device converts data in a 16-bit (2’s complement) format with a resolution of 12 bits. It operates effectively with a maximum load resistance of 500 Ohms,