Search Results
1926 results
ST-1904
GE Fanuc Emerson / RSTi PacSystem
This discrete input module operates with a nominal input voltage of 240V AC and a voltage range from 170 to 264V AC. Each common can handle 4 points, making it suitable for various applications. The module exhibits an input impedance of about 22K Ohms, with a signal delay of 10 milliseconds. The on-
IC600YB908
GE Fanuc Emerson / Series Six
This output module supports a maximum response time of 1 millisecond with an on-state voltage drop not exceeding 2.25 volts. The operating temperature range for the IC600YB908 is from 0 to 60°C, with a humidity tolerance spanning 5 to 95% without condensation. Its total on-state current capacity is
IC200UAR028
GE Fanuc Emerson / Versamax
This power supply unit operates within an AC voltage range of 100 to 240 volts. It has a power supply rating of 16 VA, with the maximum input voltage reaching 132V RMS at 50/60 Hz. The output leakage current at 240 volts AC is 15 mA, and the minimum output load is set to 10 mA.
IC610MDL106
GE Fanuc Emerson / Series One
This input module can operate with a maximum open circuit voltage of 36 VDC and allows an input current of 16 mA per channel. The ON level voltage range is from 0 to 3 VDC, while the OFF level voltage spans from 18 to 36 VDC. It features a response time between 4 and 15 milliseconds for transitions
IC600PM503
GE Fanuc Emerson / Series Six
This I/O rack power supply operates within an input voltage range of 95 to 260 volts AC and delivers 275 load units. It features one status indicator light for monitoring operations and is suitable for indoor environments where conditions are clean, dry, and free from EMC noise. The operational temp
IC697MDL671
GE Fanuc Emerson / Series 90-70
The IC697MDL671 module is an accessory part from Series 90-70 by GE Fanuc. This interrupt input module operates on 24 Volts DC voltage and it features 16 inputs in 4 groups of 4 each. The unit has an input current of 10 milliAmps and an isolation voltage of 1500 Volts.
IC200ALG328
GE Fanuc Emerson / Versamax
The GE Fanuc Automation IC200ALG328 Versamax I/O module has an update rate of 15 milliseconds maximum. It requires thermal derating to operate properly.
IC755CSS15CDACA
GE Fanuc Emerson / Quickpanel
The IC755CSS15CDACA terminal is a Quickpanel operator interface terminal for industrial internet applications. It has been manufactured by GE Fanuc.
IC754VBL06CTD
GE Fanuc Emerson / Quickpanel
6 in. Color with RS232/RS485 using 12 - 30 VDC
ST-3524
GE Fanuc Emerson / RSTi PacSystem
This module houses four channels, each capable of processing input with a resolution of 12 bits, equating to 4.8 mV per step. It offers a voltage range from -10 to 10 volts DC and operates at a fast update rate of 4 milliseconds for all channels. The module's input impedance of 500 kilohms facilitat