Search Results
8522 results
A1SX41
Mitsubishi / A Series
The Mitsubishi A1SX41 is an industrial automation system-specific DC leakage-type input module. It has a sink-type structure and 32 input points for pinpoint connections. In its off state, it draws less than 1 mA of current and generates less than 4V DC. It accepts inputs of either 12V DC or 24V DC
MR-J3-60A
Mitsubishi / MELSERVO MR-J3
The MR-J3-60A servo amplifier is a Mitsubishi Electric servo amplifier from the MELSERVO J3 series. It is well-suited for various motor control applications in industrial automation and control systems. The MR-J3-60A servo amplifier’s built-in dynamic brake enhances control and stability during rapi
Q64DAN
Mitsubishi / Melsec-Q
This analog output module occupies 16 I/O points on the PLC and features four integrated analog outputs. It supports an output voltage range of -10 to 10V, 0 to 5V, and 1 to 5V, along with current ranges of 0 to 20mA and 4 to 20mA. The module has a compact design, with dimensions of 27.4 mm in width
GT2712-STBD
Mitsubishi / GOT2000
This HMI terminal supports communication via multiple interfaces, including RS-232, RS-422/485, USB, and Ethernet. It is powered by 24 V DC and consumes a maximum of 45 W. It can withstand temperatures ranging from 0°C to 50°C. The unit includes an SD card slot for additional storage capabilities, s
A2USCPU
Mitsubishi / A Series
The Mitsubishi A2USCPU is a general-purpose PLC that scans continuously at 10 to 190 ms in refresh mode and supports up to 81292 I/O device points, allowing comprehensive communication and control over automation devices and sensors. The 0.46 kilogram is easy to install and maintain and has a 0.2 μs
AJ65SBTB2N-16R
Mitsubishi / A Series
This relay output module occupies a single station and provides a rated load voltage of 240 VAC for AC loads and 24 VDC for DC loads. Each output can handle a maximum load current of 2.0 A, with the switching voltage limits set at 264V AC and 125 VDC. The response times are specified at 10 ms for th
MR-J4-20B-RJ020
Mitsubishi / MELSERVO MR-J4
The MR-J4-20B-RJ020 AC servo drive accommodates an AC supply voltage range of 200 to 240 Volts and a DC supply voltage range between 283 and 340 Volts. It can function with either single-phase or three-phase input systems. Rated at 1.5 Amperes, it provides an active power output of 200 Watts (0.2 kW
MSDA021A1A
Mitsubishi / A Series
The Panasonic MSDA021A1A AC servo drive uses a great motor-handling technique designed to improve the performance of AC servo motors in industrial automation. This driver can operate with an input voltage of 100–115 volts AC (1-phase) and a frequency range of 50–60 Hz. Additionally, it can manage a
AY40
Mitsubishi / A Series
The Mitsubishi AY40 Transistor Output Module is a small, dependable part intended for industrial automation operations. It allows for fine control of output points and has 16 transistor output points with a voltage rating of 12/24 volts DC. Its rapid reaction time of 2ms, surge absorber, and central
HC-SFS202K
Mitsubishi / MELSERVO HC
The HC-SFS202K servo motor is an AC servo motor from the Mitsubishi MELSERVO series. It is a middle inertia and middle capacity servo motor that is 200V-compatible. The HC-SFS202K servo motor supports 2 kW of output power. Its rated speed is 2000 RPM, and its maximum speed is 2500 RPM. The HC-SFS202