The Allen-Bradley 1336 PLUS drives are a family of microprocessor-based AC drives with sensorless vector control that are designed to provide control for 3-phase motors in critical applications where accurate torque and speed control is necessary. The 1336 PLUS drive series offers easy-to-use and cost-effective motor control solutions to applications with even the tightest speed requirements, and they come with built-in protection features that help to improve performance and save maintenance costs caused by unscheduled downtimes. The 1336 PLUS drives have A1, A2, A3, A4, B1/B2, C, D, E, G, and G frames with input ratings from 200 to 600 Volts AC and 0.37 to 448 kilowatts (0.5 to 600 Horsepower). All 1336 PLUS drives have both variable and constant torque capability, and each drive is sized to 115% of the full load Amps for variable torque applications, and 150% of the full load Amps for constant torque applications.
The 1336 PLUS drives employ the Pulse Width Modulation (PWM) control with programmable carrier frequencies from 2 to 10 KiloHertz. Depending on the application type, the operators can choose between the standard Volts per Hertz control method, which offers customizable Volts per Hertz curve and it is suitable for centrifugal and HVAC applications, and the sensorless vector control (SVC), which provides tighter speed control even under varying loads, higher starting torque, and lower speed operation than other control methods. The 1336 PLUS drives offer easy-to-use human-machine interface module options, communication options (single-point remote I/O, RS-232/422, DF1, DH-485, and DeviceNet networks), and the control interface card option with or without an encoder interface. This drive series features easy-to-read display interface options that support multiple languages for easy configuration, diagnostics, and troubleshooting processes. The 1336 PLUS drive series features drives with IP 00 (Open), IP 20, IP 54, and IP 65 enclosures, and they have a non-derating operating temperature range of 0 to 40 degrees Celsius.
Browse available units in our catalog of 1336 PLUS Drives.
This drive features a range of communication options, including 1-point remote I/O, which allows for flexibility in integration. It comes equipped with a user interface that utilizes a programmer/cont
Capable of operating under both constant and variable torque conditions, this drive supports sensorless vector control with complete tuning options. It features two independently programmable accelera
This adjustable frequency drive features IP20 protection and is housed in a NEMA 1 enclosure. It can be installed at altitudes up to 1000 m and operates effectively in temperatures from 0 to 40 °C. Th
This adjustable frequency AC drive operates within a voltage rating of 200 to 240 VAC and supports a power capacity of 7.5 kW. The device features communication through a 1-point remote I/O option and
This adjustable frequency drive features IP20 protection within a NEMA 1 enclosure and supports a control interface via TTL Contact. It is designed for operational efficiency at altitudes up to 1000 m
This sensorless vector drive operates effectively in the range of 0 to 400 Hz for output frequency and achieves an impressive efficiency rating of 98%. It features a PWM carrier frequency adjustable b
This drive operates at a voltage rating of 380 to 480 Volts AC and features an output frequency range from 0 to 400 Hertz. The device has an IP20 enclosure rating and can handle a constant torque inpu
This model features IP20 protection and a NEMA 1 enclosure. Its operating temperature range is 0 to 40° C, while it can be stored in temperatures from -40 to 70° C. The drive is suitable for environme
This NEMA 12 rated enclosure offers reliable shield against falling dirt, dust, and non-corrosive liquids, featuring oil resistance thanks to its gasket. The enclosure is intended for panel mounting,
This adjustable frequency drive operates within a voltage range of 380-480 volts AC and offers a nominal horsepower rating of 30. It supports various applications, from constant to variable torque req