GPD-333-Setup-and-Installation
Operating within an ambient temperature of 0 to 40 °C, this drive setup system supports installation at altitudes up to 1000 meters without any derating. It features a wide humidity range of 5% to 95%
Call
5.0
Free UPS Ground on All Orders!
+1 (919) 205-4392
Yaskawa GPD
The Yaskawa General Purpose Drive (GPD) series includes variable-frequency drives (VFDs). These drives are designed for exact motor control in industrial applications. The GPD series drives perform reliably, are energy-efficient, and provide a flexible array of options for different AC motor control requirements. Some GPD drives support the DeviceNet network for communication.
Learn more
Browse GPD
Browse available units in our catalog of GPD.
GPD-403-Maintenance
Regular maintenance intervals for the GPD-403 are recommended every 6 to 12 months. The AC drive requires checks on cooling components and electrical connections. Environmental conditions should remai
Call
4.5
GPD515C-A008
This AC drive accommodates overload conditions, capable of handling 150% overload for a duration of 60 seconds. Its enclosure meets NEMA 1 standards (IP20), ensuring essential protection for internal
Call
5.0
GPD515C-A064
This model operates within a frequency range starting at 50 Hz and reaching up to 60 Hz. It features a current rating of 64 A and is capable of performing in ambient temperatures from 0 to 60 degrees
Call
5.0
GPD515C-B041
This AC drive can output voltages from 0 to 460 VAC, with an output frequency range between 0 and 400 Hz. Its output current is rated at 41 amps, providing sufficient power for numerous applications.
Call
5.0
GPD515C-B065
This drive accommodates multiple control modes: V/Hz Control, Sensorless Vector Control, and Flux Vector Control. It can handle overload conditions of up to 150% for a duration of 60 seconds, ensuring
Call
5.0
MVB003
This micro AC drive supports an input frequency of 0 to 400 Hz and features a maximum current rating of 3.4 A. The output power is rated at 0.75 kW (1 HP) using a three-phase configuration. The drive
Call
4.5
GPD515C-B003
Operating at a frequency of 50/60 Hz, the GPD515C-B003 features a control method based on Voltage/Frequency (V/F). It is built with essential protection measures against overload, overvoltage, and ove
Call
5.0
DS045
With a full load current of approximately 8.8 Amps, the drive operates efficiently across a supply frequency range of 50 to 60 Hz. It allows output frequencies adjustable from 0 to 400 Hz and provides
Call
4.5
GPD-315-Dynamic-Braking-Option
This dynamic braking module operates with input voltages of 230/460 VAC and is designed for 3-phase systems. The brake resistor duty cycle accommodates different requirements: 3% when mounted on a hea
Call
4.5
Showing 121-130 of
154
results