- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley ArmorPoint Modules Repair
We offer extensive repairs for your ArmorPoint Modules. We keep many spare parts in stock so that we can repair your ArmorPoint Modules as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your ArmorPoint Modules parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse ArmorPoint Modules Repairs
Browse our catalog of repairable ArmorPoint Modules parts to get a quote.
1738-232ASCM12
The 1738-232ASCM12 module is an Allen-Bradley/Rockwell Automation ArmorPoint I/O RS-232 ASCII module. The module provides 1 full duplex input. The 1738-232ASCM12 module has a nominal voltage rating of
In Stock Ships Today
1738-ACNR
The Allen-Bradley 1738-ACNR adapter is an ArmorPoint ControlNet adapter. Its expansion I/O capacity can support a maximum of 63 modules, 5 rack-optimized connections, and 25 direct connections. It has
In Stock Ships Today
1738-ADN12
The 1738-ADN12 is a Series A/Bulletin 1738 ArmorPoint DeviceNet adapter designed and manufactured by Allen-Bradley/Rockwell Automation. This ArmorPoint adapter is equipped with an M12 connector and ra
In Stock Ships Today
1738-ADN18P
The 1738-ADN18P module is an ArmorPOINT I/O DeviceNet adapter module manufactured by Allen-Bradley/Rockwell Automation. This module comes with a mini connector and it has a nominal voltage rating of 2
In Stock Ships Today
1738-ADNX
The Allen-Bradley 1738-ADNX adapter is an ArmorPoint DeviceNet adapter. It has a maximum backplane current output of 1.0 Amp. This adapter has an enclosure rating that meets the IP 65, 66, and 67 stan
Available
1738-AENT
The Allen-Bradley 1738-AENT Adapter is an ArmorPoint EtherNet/IP Series A Adapter. It has a maximum backplane current output of 1.0 Amp. This adapter has an enclosure type rating that meets the IP 65,
In Stock Ships Today
1738-AENTR
The Allen-Bradley 1738-AENTR Adapter is an ArmorPoint I/O 2-Port EtherNet/IP Series A Adapter. It supports a maximum of 63 modules, 5 rack-optimized connections, and 20 direct connections. This adapte
In Stock Ships Today
1738-IB16DM12
The Allen-Bradley 1738-IB16DM12 Module is an ArmorPoint 24 Volt Series-A Input Module. It has 16 non-isolated inputs and 5 Volts of off-state voltage. This input module has an enclosure rating that me
In Stock Ships Today
1738-IB4M12
The input module with the catalog number 1738-IB4M12 is manufactured by Allen-Bradley/Rockwell Automation and it operates at 24 Volts DC. The module has M12 (micro) connectors and it has 4 inputs in 1
Call
1738-IB8M12
The Allen-Bradley/Rockwell Automation DC input module with the product code 1738-IB8M12 is part of the ArmorPoint I/O product series. The 1738-IB8M12 module comes with a mounting base and M12-style mi
In Stock Ships Today
Showing 1-10 of
15
results