- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-D140EA11
The 100-D140EA11 Bulletin 100-D contactor is an Allen-Bradley 3-pole contactor. It has a current rating of 140 Amps. The 100-D140EA11 contactor is certified and approved by the UL, CSA, IEC, CCC, and
In Stock Ships Today
100-D140EA22
The 100-D140EA22 contactor is a Bulletin 100-D MCS non-reversing IEC-certified contactor developed by Allen-Bradley/Rockwell Automation. It has an AC-3 current rating of 140 Amps and an AC-1 current r
In Stock Ships Today
100-D140EG00
The 100-D140EG00 contactor is an Allen-Bradley Bulletin 100-D non-reversing contactor with a maximum current rating of 140 Amps (AC-3). It is equipped with an electronic AC coil with an integrated ele
Call
100-D140EG11
This IEC contactor is non-reversing with three poles for use in three-phase systems. It has a coil voltage range of 208-277 V AC 50/60 Hz and a rated operational voltage of 690 V AC. Its auxiliary con
Call
100-D140EJ00
Equipped with two auxiliary contacts, this model provides one normally-open and one normally-closed contact. It supports an electronic interface for enhanced connectivity. The contactor upholds a fing
In Stock Ships Today
100-D140EN00
The Allen-Bradley Bulletin 100-D series 100-D140EN00 contactor has a voltage range of 115 to 600 Volts AC (and it can operate with 1000 Volts AC motors per the IEC standards) and a current rating of 1
In Stock Ships Today
100-D140EN11
The 100-D140EN11 Contactor has 3 main contacts (all normally open) and 2 factory-supplied side-mounted auxiliary contacts (1 normally open and 1 normally closed). The 100-D140EN11 Contactor comes with
In Stock Ships Today
100-D140EP00
The Allen-Bradley Bulletin 100-D series 100-D140EP00 contactor is an IEC contactor. It is a 3-pole contactor. The current rating of the 100-D140EP00 contactor is 140 Amps.
Call
100-D140EP11
The Allen-Bradley 100-D140EP11 Bulletin 100-D contactor is a 140 Amps rated contactor. It is a 3-pole device. The 100-D140EP11 contactor has an electronic coil rated for 100 Volts AC.
Call
100-D140EY00
Designed with a robust electronic coil, this contactor supports three poles and provides two auxiliary contacts for enhanced functionality. The voltage specification ranges between a minimum of 42 VAC
Call
Showing 211-220 of
720
results