- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-D140EY11
This contactor includes three poles and operates at a control voltage range of 200–255V AC or DC. It has horsepower ratings of up to 100 Hp at 460V and 125 Hp at 575V for three-phase systems. The devi
Call
100-D140EZA00
This MCS D Contactor supports a maximum current rating of 115 A and features a switching frequency of 120 operations per hour. It maintains a contact configuration with no normally open or normally cl
Call
100-D140EZA11
This contactor is designed for three-phase operations and can handle up to 220 amps of general-purpose current. It operates effectively within a voltage rating of 600V (UL/CSA) and 1000V (IEC). It off
Call
100-D140EZD00
This contactor operates effectively with a minimum coil voltage of 110 VDC and a maximum of 130 VDC. Its electronic coil type enhances responsiveness, making it suitable for various applications. Rate
Call
100-D140EZD11
This contactor consists of three poles and incorporates an electronic coil with an interface. It features one normally open (N.O.) and one normally closed (N.C.) auxiliary contact. The rated output is
Call
100-D140EZY00
This contactor has three poles and features an electronic coil with a voltage range of 48 to 72 VDC. It interfaces with PLC systems, supporting a signal voltage of 24 VDC and specific pick-up and drop
Call
100-D140EZY11
This contactor supports a maximum frequency of 60 Hz and is rated for a minimum frequency of 50 Hz. The device can handle motor horsepower ratings of 50 Hp at 230 V, 100 Hp at 460 V, and up to 125 Hp
Call
100-D140G00
The Allen-Bradley 100-D140G00 Contactor is a Bulletin 100-D compact IEC contactor designed for high load devices such as those used in lighting and AC motor applications. The 100-D140G00 IEC Contactor
Call
100-D140G11
The Allen-Bradley 100-D140G11 Bulletin 100-D AC-operated contactor is supplied with a conventional AC coil with a 440 Volts AC actuation voltage rating. It has switching ratings of 140 Amps, 82 kilowa
Call
100-D140H00
The Allen-Bradley 100-D140H00 contactor is a Bulletin 100-D series IEC contactor. It is also a 3-pole device. The 100-D140H00 contactor has a conventional coil rated for 208 Volts AC.
Call
Showing 221-230 of
720
results