1994 results
This versatile I/O terminal module supports various wire sizes, from 0.2 to 4.0 mm² for solid copper and 0.2 to 2.5 mm² for stranded wires. With a terminal torque range of 0.5 to 0.6 Nm, it provides secure connections. It includes 36 box-style terminals configured in a compact layout, with vertical
The GE Fanuc Automation IC693CBK002 cable kit contains 2 cables with a 24-pin connector on each of them. These cables are used in modules with TBQC assemblies.
This GE Fanuc Series Three power supply module features two captive screw fasteners for secure installation and includes a CPU programmer bracket for easier setup. It is equipped with a fault relay, run contacts, and connectors to expand to the next upstream base unit and connect with the CPU in the
Within the RSTi PacSystem family, the ST-4212 module offers two current outputs per common point. It operates with an output current range of 4-20 mA, has a high resolution of 12 bits, and supports an update rate of 2 milliseconds for both channels. Designed for efficient functionality, it accommoda
The GE Fanuc IC693CBL325 Terminal Board Interface Cable is designed for the Series 90-30 PLC system. It has has a maximum cable length of 10.0 feet and a 36-pin connector.
This Genius Bus Controller supports a wide operating range, functioning effectively from temperatures as low as 0°C up to 60°C. It can be stored within a broader temperature spectrum of -40°C to 85°C. Additionally, it operates under relative humidity conditions between 5% and 95%, ensuring versatili
The GE Fanuc IC694MDL931 Relay Output Module is made for the Rx3i PacSystem. This relay output module has 8 individually-isolated output circuits (4 NC relays and 4 Form C Relay), and it requires a user-supplied external AC/DC power supply for operation.
This module supports local I/O applications and operates effectively within a temperature range of 0 to 40 degrees Celsius. It can withstand storage conditions from 0 to 50 degrees Celsius, with a maximum humidity of 80% RH, non-condensing. The IC600YB900 is suitable for installations at altitudes u
The IC660TBA104 terminal assembly is a GE Fanuc terminal with 4 inputs and 2 output circuits. The unit has a 115 Volts AC or 125 Volts DC rated current source analog block and it has a maximum current of 250 milliAmps (AC) or 140 milliAmps (DC). The unit has a frequency of 47 to 63 Hertz and 10% rip
This analog input module accommodates a total of eight inputs, allowing for current measurements in either the 0 to 20 milliamps or 4 to 20 milliamps range. It draws 8 milliamps from the system current path with a resolution of 16 bits, ensuring precise data acquisition. For communication, it utiliz
This input module supports eight sink inputs and does not require an external power supply. The maximum voltage rating reaches up to 36 volts DC, with an input impedance of 1.8 kilohms. The on-state level is maintained below 3 volts DC, while off-state levels exceed 3 volts DC. LED indicators are in