Search Results
7350 results
B100 Series
Eaton Cutler-Hammer / PLCs
The B100 motor starters from Eaton Cutler-Hammer are manual motor starters. These motor starters are available with toggle switches or with pushbuttons. They support single-phase and 3-phase motors with the correct Horsepower and voltage ratings. B100 motor starters are compatible with 3-phase motor
MTE Transformers
Eaton Cutler-Hammer / PLCs
Eaton MTE transformers are control power transformers. They isolate control circuits from lighting and power circuits. They include epoxy-encapsulated coils and operate at 50/60 Hz frequency. MTE transformers have standard insulation rated for 130 degrees Celsius. They operate efficiently with coppe
1734-AENTR
Allen Bradley / PLCs / Point I/O 1734
This Ethernet/IP adapter module offers a maximum inrush current of 6 amps over a brief duration of 10 milliseconds. Power consumption reaches a maximum of 10.4 watts when operating at 28.8 volts DC. The module also has a power dissipation of 21.5 BTU/hr at this voltage. With a fieldbus power capacit
1734-AENT
Allen Bradley / PLCs / Point I/O 1734
This device operates with a nominal input voltage of 24 volts DC and accommodates an input voltage range of 10 to 28.8 volts. With a maximum inrush current rating of 6 Amps for 10 milliseconds, it allows substantial initial current draw. Additionally, the module has a maximum power consumption ratin
1734-IB8
Allen Bradley / PLCs / Point I/O 1734
This input module supports eight sinking inputs with a nominal current rating of 4 milliamps at 24 volts DC. The input voltage can be off up to a maximum of 5 volts DC, while the minimum off-state current is rated at 1.5 milliamps. It can handle a maximum POINTBus current rating of 75 milliamps at 5
1734-IB8S
Allen Bradley / PLCs / Point I/O 1734
This safety module includes eight inputs, each with a minimum on-state voltage requirement of 11 volts DC and a minimum operating current of 3.3 milliamps. Additionally, it boasts a maximum off-state voltage of 5 volts DC and off-state current not exceeding 1.3 milliamps. This model also integrates
5069-L306ER
Allen Bradley / PLCs / CompactLogix 5069
This controller supports both linear and star topologies alongside device-level rings, accommodating diverse network configurations. It has a user memory capacity of 0.6 MB and is capable of handling up to 32 controller tasks efficiently.
1769-L33ER
Allen Bradley / PLCs / CompactLogix
This programmable automation controller can support up to 16 local modules and two banks, enhancing system expansion possibilities. It features a memory capacity of 2 MB and facilitates communication via USB and Ethernet ports, utilizing Ethernet I/P protocol. The controller operates effectively wit
1766-L32BXB
Allen Bradley / PLCs / MicroLogix 1400
The controller operates on a power supply of 24 volts DC, falling under Class 2 SELV guidelines. It supports a power consumption rating of 50 watts, and uses a 15-amp inrush current for 20 milliseconds at 24 volts DC. Input circuits are rated for digital usage at 24 volts DC and analog readings from
1756-PA72
Allen Bradley / PLCs / ControlLogix
This model operates on an input voltage range of 120/240 Volts AC and can deliver output current capacities of 2.8 Amps at 24 Volts DC, 10.0 Amps at 5.1 Volts DC, and additional outputs at lower voltages. Its isolation voltage rating is 250 Volts for continuous operation, and it functions within a t