The 1336 Transistor Assembly series by Allen-Bradley is a family of transistor and IGBT output replacement accessories for the 1336 PLUS, PLUS II, FORCE, IMPACT, and REGEN series of drives. Accessories in this series include the main transistor and IGBT assembly kit with a built-in gate drive interface (the 1336-QOUT-xxx), the precharge transistor module (the 1336-QPRE-xxx), and the thyristor (SCR) assembly (the 1336-SCR-xxx). The 1336 Transistor Assemblies are available with a single transistor and thyristor per kit, 2 transistors and thyristors per kit, 4 transistors and thyristors per kit, 2 transistors and 2 gate drive boards per kit, or 4 transistors and 2 gate drive boards per kit. They are compatible with 230 Volts AC, 460 Volts AC, and 575 Volts AC drives with ratings from 7.5 to 800 Horsepower. There are slight model variations across the entire series, but all 1336 transistor assemblies have a common installation mode.
The 1336 Transistor Assemblies are installed on the drive’s heatsink. When installing the 1336 Transistor Assembly, careful considerations must be taken to meet the mounting surface or mounting torque specifications of that particular transistor unit or kit. To install the 1336 Transistor Assembly, the power must first be disconnected from the drive and the bus voltage on the +DC and -DC end of the terminal block TB1 must be zero before any installation attempt is made. The installation surface must be prepared first by coating it with the supplied thermal compound (Dow Corning DC 340) and then mounting the required 1336 Transistor Assembly on the heatsink. Then the transistor mounting holes are aligned with the heatsink holes, and the new screws supplied with the kit are inserted into the heatsink holes to hold the transistor module in place.
Browse available units in our catalog of 1336 Transistor Assembly.
This output assembly requires three boards for proper functionality within each drive. The unit is designed to be compatible with various frame B drives and can operate efficiently across a wide range
This output assembly operates at a nominal voltage of 230 V AC and supports 3-phase configurations, providing an output power rating of 60 HP. It features a rated current capacity between 125 and 150
This transistor output assembly integrates an encapsulated IGBT module, capable of supporting output power ranges from 400 to 800 HP. It is engineered for compatibility with drives operating between 4
Operating within a voltage range of 460 VAC, the 1336-QOUT-SP20A features a high-speed PWM switching type. It includes an encapsulated IGBT module with a terminal count of three, specifically configur
This transistor assembly supports a frequency range from 50 Hz to 60 Hz. It can operate reliably within a temperature window of 0 to 40 degrees Celsius and withstands humidity levels up to 80% without
Designed for versatility, this assembly requires three kits per drive to effectively switch electrical signals. It is equipped with LED indicators for status monitoring. The operating temperature rang
This transistor assembly is designed to be compatible with B frame setups. Each transistor requires three boards for proper functionality. It integrates effectively with various drives, including PLUS
This transistor output assembly is rated for 575 V AC and can handle motor power from a minimum of 150 Hp to a maximum of 300 Hp. It is designed in an E frame type, accommodating three kits per drive.
This inductor supports several drive types, including the 1336 PLUS, 1336 PLUS II, 1336 FORCE, and 1336 IMPACT drives. It is rated for frame size E and has HP ratings of 100 or 125 for 230V drives, an
This transistor assembly has a size C frame and is classified as a spare part at level 2. Each drive requires three units for complete functionality. It operates efficiently in temperatures ranging fr